Question about 2006 Chevrolet Chevrolet Uplander

1 Answer

I installed all new bulbs in my 2006 chevy uplander and still get fast flash.yet when i lock or unlock doors all lites flash properly

Drl and turn signal dont work on one side or the other. then, at times,the dashboard would show left or right turn signal bulb is out.Then it will work properly until i make another left or right turn. Is this a electrical short or a fuse? please help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Could be a loose ground wire

Posted on Jan 01, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

1 Answer

Where is located the keyless module in Chevy Uplander 2006


Have you tired reprogramming the remotes top work the module first, that is what must be done before any parts are replaced, they do loose programming for no apparent reason at times. This can be causes by an electrical magnetic pulse of some sort.

Aug 17, 2012 | 2006 Chevrolet Uplander

1 Answer

2008 Chevy Uplander not locking


I had the exact same problem start with mine yesterday. I found a suggestion to check the fuses that are located on the passenger side of the vehicle but I didn't see any problems there so my next step will be to change the driver side door switch which appears to be the master switch.

Jun 28, 2012 | 2008 Chevrolet Uplander

1 Answer

Front left turn signal blinking fast


If the front signal is blinking fast then theres a bulb out, check the rear to see if theres a bulb out, use the right side to see how many light are blinking and make sure the same is on the left, the main reason for fast blinking signal is a bulb is out on that side. good luck, have a nice day.

Jan 14, 2011 | 2006 Chevrolet Uplander

1 Answer

Originally my passenger door on my 2003 Chevy Trailblazer EXT would not always unlock with the FOB. Was an intermittent problem. Then last friday my driver and passeenger doors would not lock or unlock...


fast blinking lights are a sign of a burned out light bulb. Door lock actuators wear out. Since all the actuators operate every time you lock or unlock the doors, it's not unusual for multiple actuators to go bad

Jul 09, 2017 | Chevrolet TrailBlazer EXT Cars & Trucks

1 Answer

Rear door lock won't lock or unlock on 2006 chevy colorado


could be door acuator switch. remove rear door cover follow rear door lock rod it will lead you to the lock motor check power plug make sure its its cliped in some times they come loose.next if plug is tight get a test lite chech see if you have power to lock motor have a friend move master switch up and down while youcheck for power mostlikely the switch is no good.

Apr 10, 2010 | 2006 Chevrolet Colorado

1 Answer

Replace taillight assembly on 2006 Uplander


open tailgate, remove 2 screws holding assembly in place. Pull tail lamp rearward to disengage 2 retainers on backside of assembly. Unplug connector. Replace assembly or bulbs now as desired

Mar 05, 2010 | 2006 Chevrolet Uplander

1 Answer

Hi I want to program a new keyless fob. I have the original fob that works great.Do I need to do anything to the original key when I program the new fob? 2006 nissan altima


1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.


5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

Nov 16, 2009 | 2006 Nissan Altima

2 Answers

Rear wiper on chevy uplander does not work. fuses


i have a 2006 chevy uplander and i need to change the low beam headlamp how do i do it, also about a month after we had got the van the rear wiper stopped working i haven't checked the fuse yet, but is this a common problem for the uplander, and also the abs light stays on what should i do for that problem, and also when we drive it and then shut it off it does not want to turn on right away.

Oct 25, 2009 | 2006 Chevrolet Uplander

Not finding what you are looking for?
2006 Chevrolet Chevrolet Uplander Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...