Question about Cars & Trucks

1 Answer

98 dodge 1500 stalls as soon as placed in reverse run rough in drive but dose not stall code scanner says open loop on fuel system is this a bad pcm

Also interior computer for mpg and dte not working only direction and outside temp here is code scanner report any help is appreciated VIN: 3B7HF12Z0WM240318 Report 104 Vehicle: 1998 Dodge Ram Pickup Date of Report: 10/29/2012 9:55:03 AM Engine: V8, 5.9L Mileage Reported: 100000 DTCs Engine/Transmission Engine/Transmission Diagnostic Trouble Code Information Close Details MIL DTC P0118Engine Coolant Temperature Sensor Circuit High Input Stored Codes P0118Engine Coolant Temperature Sensor Circuit High Input Freeze Frame Information Close Details Parameter Description Results DTC for which Freeze Frame was Stored P0118 Fuel System 1 Status Open Loop Fuel System 2 Status Not Supported Calculated LOAD Value 12.16 Engine Coolant Temp -40.00 Short Term Fuel Trim - Bank 1 0.00 Long Term Fuel Trim - Bank 1 0.00 Intake Manifold Absolute Pressure 11.84 inHg Engine RPM 1,344.00 rpm Vehicle Speed Sensor 0.00 mph Monitor Status Close Details Monitor Name Monitor Icon Status MIL (Check Engine Light) ON Misfire Monitoring Complete Fuel System Monitoring Complete Comprehensive Component Monitoring Complete Catalyst Monitoring Not complete Heated Catalyst Monitoring Not Supported Evaporative System Monitoring Not Supported NMHC Monitoring Not Supported NOxAdsorber Monitoring Not Supported Secondary Air System Monitoring Not Supported Oxygen Sensor Monitoring Not complete Oxygen Sensor Heater Monitoring Not complete EGR System Monitoring Not Supported Boost Pressure System Monitoring Not Supported Exhaust Gas Sensor Monitoring Not Supported PM Filter Monitoring Not Supported

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,070 Answers

Duplicate question.

Posted on Oct 29, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 dodge ram 1500 5.9L 2wd. Truck runs really rough, stalls, then won't start. No check engine light now. Had misfire codes, did tune up, now it still stalls and no check engine light.


What is the O2 sensor reading? If it runs rough check the engine compression, run an injector flow test and clean and replace as necessary. Check the EGR for leakage. Drive it and see if the misfire codes return, I think they will.

Sep 08, 2016 | Dodge Ram 1500 Cars & Trucks

2 Answers

Bled fuel lines,motor stalling,missing,runs well under load


Why would you bleed a fuel line? The electric pump, if it is giving good pressure, will deliver plenty of fuel. Any codes? What codes?
At this juncture, it could be nearly anything, including a low pressure delivery from the pump. Tell us more so we can help you better!

Mar 06, 2015 | 2002 Jeep Liberty

1 Answer

Why does my pathfinder stall in reverse or drive


Have the computer codes checked first....
what was the solution to the problem so it can help in the future? Did you have a bad dose of fuel?

Jun 25, 2014 | 1997 Nissan Pathfinder

1 Answer

Hi everyone. I have a 2008 Dodge Grand Caravan SXT, and we recently had the torque converter replaced because it started to run really rough in drive and most of the time it would stall as soon as it was...


have the fault codes read first as the current problem as with the first has nothing to do with a torque converter
more like vacuum leaks , injector problems , low fuel pressures

Apr 09, 2017 | 2008 Dodge Grand Caravan

1 Answer

2003 dodge pickup 5.7 hemi motor ---- driving along fine stoped at stop light it started to run rough , then stalled ,it started back up then stalled again . now it will roll over ok but will not...


your problem sounds fuel related chk your fuel pressure. or simply turn key off then to on position (engine off) and see if u can hear your fuel pump run (2-3 sec) then it will turn off.

Nov 07, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Stumbling idle, stalls when throttle opens


If the car is running that bad the check engine light should be on and code/s stored in the pcm along with a snapshot of what is going on at the time the code is set. A possible solution is to check the Mass Airflow Sensor or the MAP (manifold absolute pressure) sensor depending on which your vehicle is equipped with. The engine may run until the engine computer switches to closed loop fuel control (means its warmed up and the pcm is in control of the fuel trim) and then stall upon accel. Be sure you have checked all the basics first.

Apr 18, 2009 | 2000 Suzuki Esteem

1 Answer

98 dodge ram 1500 4x2 ...5.2l,stalls immediatly


you might have a bad torque converter lockup switch

Mar 17, 2009 | 1998 Dodge Ram 1500 4WD

3 Answers

OBD 1 and 2 will not communicate with PCM.


a blown fuse will also cause the obd to not communicate

Nov 12, 2008 | 1994 Pontiac Bonneville

1 Answer

1994 dodge ram 1500 5.2L


Code 11 "" No crank reference signal to the PCM. or bad Crank sensor. If no crank signal no spark and signal to the injectors.
Replace as soon as possible.

Jul 03, 2008 | Dodge Ram 1500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...