Question about 1991 Chevrolet S-10 Blazer

Open Question

Need front end bushing kit 2000 blazer 4x4 - 1991 Chevrolet S-10 Blazer

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 350 Answers

SOURCE: engine removal out of a 2000 chevy blazer 4x4

hi everything is easy if you know what you are doing and have the right equipment so have you got lifting gear have you got a good selection of tools and will need a little help getting the engine in and out otherwise you will struggle and you need to be inside with plenty of space good luck, yates210456

Posted on Oct 26, 2008

Ad
  • 114 Answers

SOURCE: loud hum from front end-99 blazer 4x4

Sounds like the front hub bearing assembly.

Posted on Jan 22, 2009

MNfisherman
  • 11896 Answers

SOURCE: squeaking front end

It would be your bushings. Every blazer in the usa seems to have this problem. You think for 25 years of making them, they would fix this problem.

Posted on Feb 11, 2009

  • 491 Answers

SOURCE: front end squeaks in my 97 blazer

yes it could be the bushings or ball joints going bad oe the shocks/struts to

Posted on Feb 11, 2009

  • 3 Answers

SOURCE: 4x4 front axle wont disengage its electric

Re check your wiring it souds like you may have crossed some wires, or wired it where the switch is always on. The electrical componet you have is much different than the original vaccum type 4 wheel drive engagement.

Hope this helps

Posted on Apr 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud clicking noise from front end of 2000 chevy blazer 4x4


Is the clicking noise most prevalent when turning close to full lock?
If so, then check your front drive shafts. It could be that their joints are heavily worn.

If not, then please describe when the clicking noise is most prevalent.

Nov 03, 2012 | 2000 Chevrolet Blazer

1 Answer

I'm repacing the front sway bar bushings on my '91 chevy s10 blazer 4.3 4x4, and the


When you replace the sway bar bushing you buy the kit and it should come all that you need except tools. you should have 4 bushing,2 tube looking things,4 washer things,2 long bolts. 2 flat washer,2 lock washer,2 nuts, let me know how it went

Apr 23, 2011 | 1991 Chevrolet S-10

1 Answer

2000 jeep gc laredo 4x4 4.7 auto The front end shakes


if it shakes over 50 miles per hour, it could be your front tires need balancing. and check your ball joints while you are at it. or king pins if it has that. (they are different from ball joints but serve the same purpose.)

May 14, 2010 | 2000 Jeep Grand Cherokee

2 Answers

What Makes 2000 Chevy Blazer sway all over & does it hve a steering Damper?


this could be worn out steering parts or steering box even supenshion bushes or broken springs will do this, jack it up and look for play in the steering parts

Apr 01, 2010 | 2000 Chevrolet Blazer

1 Answer

2000 ford f350 4x4 front end rattle while turning left or bumps


chk your sway bar bushings, but dont count out the front drive line slip joint. this happened to me and drove me and three other ford mechs nuts for awhile

Nov 27, 2009 | 2000 Ford F350 Super Duty Super Cab

1 Answer

Front end suspension problem. Drivers side hearing clunking noise like metal to metal. Mechanic says shocks are good


look for loose caliper, sway bar bushing, control arm bushing ball joints, anything that can move too freely

Nov 25, 2009 | 2000 Chevrolet Blazer

1 Answer

Steering is loose


look at the steering knuckles on the tierod ends for play. they are probably worn. have your steering box sector shaft checked for runout. sometimes they have an adjustment on them. Bushing kits can be had from napa or any reputable off road shop.

Jul 18, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front


the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Jun 23, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

2000 gmc jimmy 4x4 snise on left front


check body mount bushings if just a little loose will cause to squeek.

Feb 14, 2009 | 2000 GMC Jimmy

2 Answers

I have a 2001 blazer with about 81,000 miles on it. I am being told that I need to replace the front wheel bushings and that this needs to be done prior to my 300+ mile trip to Minneapolis. I am being...


all 1998 and newer 4x4 blazers and s10s have front wheel bearing problems. If they are bad and you do not replace they can com apart then the only thing holding the wheel on is the axle shaft.

Nov 25, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...