Question about 2003 Jeep Grand Cherokee

1 Answer

2003 jeep grand cherokee will not start.

Fuel pump and filter replaced last week. Battery, starter, cam and crank all fine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,101 Answers

Does is crank but no start,and are you getting spark to thw start plugd

Posted on Oct 30, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 218 Answers

SOURCE: 1995 JEEP GRAND CHEROKEE RAN AND DIED WILL NOT START

IS IT THE 4.0L?IF SO U MAY HAVE A BAD CRANKSHAFT POSITION SENSOR.

Posted on Apr 28, 2009

66 chrgr
  • 1011 Answers

SOURCE: my 1997 jeep grand cherokee cuts off while driving or wont crank

the crank sensor can be bought at a autozone napa ect . but it is not very easy to replace unless you can get under the jeep!

Posted on Jun 11, 2009

  • 58 Answers

SOURCE: replace fuel filter on 1997 jeep grand cherokee

If you have the V8 engine, the filter is actually part of the fuel pump. WHICH IS IN THE TANK

Posted on Jun 28, 2009

emissionwiz
  • 76164 Answers

SOURCE: location of cam sensor 2003 jeep grand cherokee v8

Answer
pic_12.gif
pic
REMOVAL - 4.7L
The Camshaft Position Sensor (CMP) on the 4.7L V–8 engine is bolted to the front/top of the right cylinder head (CMP Location—4.7L Engine).

It is easier to remove/install sensor from under vehicle.

Raise and support vehicle.
Disconnect electrical connector at CMP sensor (CMP Location—4.7L Engine).
Remove sensor mounting bolt (CMP Location—4.7L Engine).
Carefully twist sensor from cylinder head.
Check condition of sensor o-ring.
See picture for sensor location.


9347d80.gif

Posted on Jul 21, 2010

Testimonial: "that is just what i needed thanks"

  • 2926 Answers

SOURCE: 96 jeep grand cherokee limited

I could be the CKP (crank sensor), but it could also be several other factors including the TPS. The correct way to start a diagnosis would be to see if any trouble codes are stored in memory. I'm assuming all basic ignition components are ok ; spark plugs, etc.

Posted on Aug 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 jeep grand Cherokee Larado stalling for no reason. we have looked or changed coil, fuel pump, relays, cam sensor inside distributor, this thing still stalls out, but starts right back up.


Crank sensor. Its on the passenger side on the top of tranny. Will have either 1 or 2 10mm bolts holding it on. And a plug. My 94 had the same problem. It would run fine then you shut it off and all it woild do is crank. Wait like an hour and it will start back up. New crank sensor and it was fine

Sep 13, 2015 | 1993 Jeep Grand Cherokee

1 Answer

Jeep grand cherokee dies while driving


did you change the fuel filter, very common problem that gets over looked too many times

Nov 25, 2013 | 1999 Jeep Grand Cherokee

1 Answer

2001 jeep grand chorkee long crank times replaced crank sensor cam sensor and fuel pump cold starts only 4.7 engine


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Feb 25, 2012 | 2001 Jeep Grand Cherokee

3 Answers

My jeep cherokee just broke down for no reason what could it be it wont start up.


Two most common failures are crank position sensor and fuel pump however, without any details in you post, I could be way off...there are many items that can cause a no start. I suggest you get a chilton or haynes manual, a digital multi meter and do some testing. If you need additional help with what you find post back here. first thing you need to do is isolate the problem to either electrical or fuel, then work from there.

Jan 09, 2010 | 1993 Jeep Grand Cherokee

2 Answers

My 1995 grand jeep cherokee won't start but It turns over an a battery jump didn't work. I believe I'ts an electical problem, maybe related to the alarm because the starter, engine and battery seem fine..?...


Alarms usually won't allow the engine to crank. If it is the alarm, arming then disarming it usually gets them to start. However, you probably aren't that lucky. Probably the most common problem for Cherokees with ignition issues is a crank sensor or a fuel pump. Listen to hear if the fuel pump runs when you turn the key to the run position (it will only run for 2 seconds, so have someone else turn the key while you listen at the gas filler neck)

Nov 19, 2009 | 1995 Jeep Grand Cherokee

1 Answer

1993 Jeep Grand Cherokee will not start. When


Check your fuel pump ,fuel lines,.One of the most overlooked starting causes is fuel delivery. Find the fuel rail to the injectors. Assuming you don't have a fuel pressure gauge, remove the dust cap on the fitting on the fuel rail and press the center pin in the valve to see if there's a good amount of pressure for a very brief second. There will be no continuous pressure unless the engine is running or is being cranked over. Have somebody crank it for you for a second to see if high pressure is present.

If not, first look at the fuel cutoff switch usually located in the inside stowage compartment of the vehicle. See if the reset button clicks when you press it. Next check the fuel pump fuse and relay, and finally the pump itself could be bad.

Sep 29, 2009 | 1993 Jeep Grand Cherokee

1 Answer

2001 Jeep Cherokee - Cranks won't start - Gas gauge "E" w/gas


Disconnect and replace fuel filter.With filter disconnected have someone momentarily turn key to on position to see is fuel pump is working.Make sure you have lots of rags,a drain pan and safety goggles on

Sep 11, 2009 | 1993 Jeep Grand Cherokee

3 Answers

My 2003 Jeep Grand Cherokee will not start. I


Could be fuel pump. Have you changed your fuel filter?

Aug 04, 2009 | 2003 Jeep Grand Cherokee

1 Answer

2003 jeep cherokee losing rpm and speed which is sporadic


Check fuel pump pressure, replace fuel filter, replace relays.

Jul 04, 2009 | 2003 Jeep Grand Cherokee

2 Answers

1997 Jeep Grand Cherokee cranks but won't start


Same thing happened to me at about 140k. It was the fuel pump. Best way to test if your pump is failing and loosing pressure is to see if the car will start immediately after it has been running, or turn the key to the alt position for a few minutes before starting. If your engine fires faster after it has been running or the key has been in the alt position you will probably need a new fuel pump. Great news is with a very deep socket to get the tank straps off its a 30 minute job to replace the pump/filter assembly.

Dec 17, 2008 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...