Question about Dodge Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: MAF Sensor 2004 Dodge Stratus
If your car has a MAF (Mass Air Flow) sensor, it would be located in the air delivery tube that runs from the air filter box to the throttle plate assembly on the intake manifold. It will have a wiring connector going to it, also. The MAF does exactly what it is called: It "senses" the volume, or "mass" of the air-flow; thusly it needs to be in the intake air tube. If you do NOT have such a device in the air-tube, you have a MAP sensor, (Manifold Absolute Pressure); this is another way of measuring the same air volume, albeit older technology. You will commonly find this device on the firewall, with a vacuum line running to the intake manifold.
I hope that this sheds some light on your question.
Thanks for choosing FixYa for advice!
Posted on Mar 06, 2009
The MassAirFlow sensor on a Dodge Caravan is usually mounted in the
air intake between the air filter and the throttle body, located on the intake manifold.
Sometimes mass air flow sensors are mounted directly to the throttle body.
Posted on Mar 30, 2009
Wow you guys are all a bunch of jerks!! They simply asked where it was located not how to replace it and to reply with a post of go to here or go to there is simply RUDE. If your going to post like that stay the hell off these forums as these are designed to give help not create extra steps!
The location of the sensor is on the left hand side of the van standing facing the engine. Follow the main radiator hose back to where it hooks into the engine and there you will see a wire going into the block just next to it on the right hand side. Where the wires plug into the engine is the temp sensor. I believe yo uneed a 3/4 wrench to remove it.
I had a problem with my van and the fans would not stop running. Even if I unhooked the battery overnight and then hooked it back up in the morning the fans would come back on. It was either the relay or the sensor. Replaced the sensor and no more problem.
Hope this helps!!
And again if your not here to help dont bother typing wasting others time!
Posted on May 19, 2009
It is located on the front of the transmission. you will see 2 of them one on the left under small transmission lines it is the input then to the right behind the radiator overflow there is the other one. Easiest way to change them is with a 1" deep well socket
Posted on Jun 02, 2009
Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.
Posted on Jul 02, 2009
Tips for a great answer:
Sep 14, 2015 | 1999 Dodge Caravan
Feb 23, 2015 | Dodge Cars & Trucks
Feb 18, 2011 | 2003 Dodge Caravan
Dec 02, 2010 | 2000 Mitsubishi Galant
Dec 01, 2010 | 2000 Dodge Caravan
Sep 21, 2010 | 1998 Dodge Caravan
Sep 09, 2010 | 1994 Dodge Caravan
May 17, 2010 | 1994 Dodge Caravan
Mar 30, 2009 | 2003 Dodge Caravan
45 people viewed this question
Usually answered in minutes!