Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Oct 29, 2012

How to start jeep cherokee without transponder key

Transponder key will not work

5 Related Answers

Anonymous

  • 26 Answers
  • Posted on Aug 04, 2008

SOURCE: transponder key

ex my honda civic had a transponder key at one time, but some body cut the wires behind it and it still runs. what happend to the old key and did you buy this one at the dealership?

Ad
bomark2002

Mark Bowens

  • 187 Answers
  • Posted on Jul 07, 2009

SOURCE: disable transponder chip keys

You have to measure the resistance across the key and get a resistor of the same value at radio shack and jump it across the wires at the security box, this way the security system thinks the key is always inserted. We did this with 1989 firebird some years ago and it worked great.

Anonymous

  • 20 Answers
  • Posted on Jan 08, 2010

SOURCE: how to program a transponder key for a jeep grand

if you bought the car new it has the code number on your invoice and instructions in the manual believe it or not.

Anonymous

  • 4793 Answers
  • Posted on May 06, 2010

SOURCE: 2005 Grand Cherokee: the key worked up untill now 2005 jeep grand chero...

if the key has been dropped or kept near a high magnetic item (a tv screen)it will go out,use the spare until you can get all keys reprogrammed together

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Jul 02, 2010

SOURCE: i have a 1990 jeep cherokee and it wont start? I

too many variables can cause this and unless you are mechanicaly adept then i can only advise that you call a local mechanic for his verdict

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have 2004 jeep Cherokee called locksmith and got new transponder key yesterday and now it's not starting my jeep the transponder light comes on the dash. What can I do?

I strongly suggest you get the locksmith involved. Their transponders should be tested and function. I would start with them first. It may be defective?
1helpful
5answers

How can iReset key code grand cherokee 2001 4.7 lt car was jumped started and now a key shows on dash but it wont start

All of the suggestions are great. Resetting the computer by disconnecting the battery should work. If it doesn't, you may need the antenna that fits around the ignition key slot replaced. This item sends a signal to the chip in the key and receives its "resonance" to identify the key as being valid. If this antenna is burned out, the computer can't read the key.
If you want to reset the security system (if so equipped) look here:

http://www.ehow.com/how_7492453_reset-grand-cherokee-reset-antitheft.html
0helpful
2answers

How do I programe my remote for my 1997 Jeep Grand Cherokee? Jeep starts for about five seconds then turns off? Help would be much appreciated? Thank you.

If you go to the dealer parts dept. they should be able to provide you a printout of instructions to program your remote.
0helpful
2answers

Engine dies while driving

Faulty transponder antannae at the ignition switch if the car is equipped with a transponder key. Have the security module looked at if the antannae at the ignition is good. If it is the security module a dealer will have to program your keys to the new module. If you know a good locksmith with a tko or other programmer you might be able to save some money over having a dealer install it.

If your jeep is not equipped with a transponder then look into the ignition and fuel system. The problem you described however is common with transponder issues though.
0helpful
1answer

Push button start on 2012 Jeep Grand Cherokee will not work. get the message, "damaged key". Tried second remote and get same message

could be the key transponders are not working properly . you have to go to the dealer so they can perform a relearn.
0helpful
1answer

My 2004 jeep jeep grand cherokee will start of but then turnoff rate away it starts ok but none of the are gadges working for the time that it is on

Thats sounds like an antitheft concern. Without codes not much can be done from here, Most likely a transponder issue
0helpful
3answers

My 2003 Jeep Grand Cherokee will not start. I

Could be fuel pump. Have you changed your fuel filter?
1helpful
1answer

Disable transponder chip keys

You have to measure the resistance across the key and get a resistor of the same value at radio shack and jump it across the wires at the security box, this way the security system thinks the key is always inserted. We did this with 1989 firebird some years ago and it worked great.
Not finding what you are looking for?

156 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...