Question about 2002 Pontiac Bonneville

Open Question

Where to hook up jumper cables 2000 Bonneville

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
swampthang90
  • 18 Answers

SOURCE: 2000 pontiac bonneville rear window cable came off

On my 2000 bville, all four of my windows came off. All four had the same problem. the upper and lower cables go around the pulleys then connect to a plastic piece connected to the track. This plastic piece breaks and lets the cable free. I fixed them all by removing motor assembly and reconnecting the cable with coat hangar wire. Kind of a redneck fix, I know, but beat paying 160 dollars per window for a new assembly that would probably break again!! Good luck!!

Posted on Mar 07, 2010

Ad
swampthang90
  • 18 Answers

SOURCE: 2000 bonneville, one rear cable on the left rear power window

On my 2000 bville, all four of my windows came off. All four had the same problem. the upper and lower cables go around the pulleys then connect to a plastic piece connected to the track. This plastic piece breaks and lets the cable free. I fixed them all by removing motor assembly and reconnecting the cable with coat hangar wire. Kind of a redneck fix, I know, but beat paying 160 dollars per window for a new assembly that would probably break again!! Good luck!!

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 98 isuzu rodeo and my friend hooked up the jumper cables wrong one day and now none of my dash lights or any of the switches on my dash work (4x4, cruise control, etc.) and it's stuck in 4x4


What can be damaged by hooking jumper cables up the wrong way ...

https://answers.yahoo.com/question/index?qid..
May 3, 2011 - My car battery was dead so we asked someone for a jump and when we tried starting the car, the negative jumper cable on my car started ... what happens when you hook up car battery cables wrong?
Apr 12, 2013
Hooked jumper cables up wrong and radio won't work, why?
May 26, 2010
Hooked up jumper cables backwards now my car wont start no ...
Apr 2, 2009
What happens if you hook up jumper cables backwards on a car ...
Oct 4, 2008
More results from answers.yahoo.com

Do not connect your jumper cables backwards or bad bad ...

https://www.reddit.com/.../do_not_connect_your_jumper_cables_...
RedditOct 25, 2012 - Do not connect your jumper cables backwards or bad bad things ...What I'm trying to say is, does this usually happen when you hook the cables upwrong? ... So basically there is only one way to find out for sure what going to .

Oct 16, 2015 | Isuzu Cars & Trucks

1 Answer

Every month or so it wont start, is slow starting most of the time.This morning tried jumping it and would turn over but not start, without the jumper cables on it just clicks


JUST CLICKING, MEANS LOW VOLTAGE AT THE STARTER. JUMPER CABLES ARE TRICKY.
IF THE WIRES INSIDE ARE TO SMALL, NO GOOD. JUMPER CABLES NEED TO HAVE STRONG CLAMPS & SHOULD BE MADE WITH AT LEAST # 4 BATTERY CABLE, ANYTHING SMALLER WON'T CARRY ENOUGH AMPS TO DO THE JOB. THE OTHER CAR NEEDS TO BE RUNNING AT HIGH IDLE {2000 RPM }. WAIT 5 MINUTES THEN TRY TO START THE LOW BATTERY CAR.

Jan 11, 2011 | 1997 Pontiac Bonneville

1 Answer

The cable has come off the front passenger window. Can't see how it hooks back onto lifting mechanism.


I had all four of my windows do this on my 2000 bville. There is a small plastic piece that hooks to both ends of the cable and slides up and down the rail to pull the window up and down. This plastic piece broke on all four of my windows and let the cable fall. I fixed it cheap though. I took apart each door and pulled out the motor/slide/pulley assembly and wired it back together with coat hanger wire. It was a lot of work, but beat paying 160 dollars per window for new assembly (that would probably break again!)

Jan 02, 2010 | 2000 Pontiac Bonneville

1 Answer

How can I ground my cable under the hood of a volvo s80 t6 2000? I see a positive but no ground?


YOU FIRST NEED TO DETERMINE WHICH IS
GROUNDed Plus Or Minus. I assume you are refering to hooking up jumper cables. If it is a negative ground system You hook neg. cable (Black)
anywhere on frame. Red or positive on Pos post.

Dec 31, 2009 | 2000 Volvo S80

1 Answer

Location of neutral switch for 2000 Bonn. Car does not always start.


your switch is part of the trans range sensor located on top of the trans where the shifter cable hooks to the trans

Nov 30, 2009 | 2000 Pontiac Bonneville

1 Answer

2000 ford truck starting problems


most likley the positive wire has corroded off the starter. look at the small red wire more closely, if theres alot of corosion, replace the wire (and starter if needed) if you dont see much corrosion give the wire a good tug just to see if it really is hooked up well. you should disconnect the batt. before doing any of this.hope this helps and good luck

May 25, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

2000 pontiac bonneville rear window cable came off


On my 2000 bville, all four of my windows came off. All four had the same problem. the upper and lower cables go around the pulleys then connect to a plastic piece connected to the track. This plastic piece breaks and lets the cable free. I fixed them all by removing motor assembly and reconnecting the cable with coat hangar wire. Kind of a redneck fix, I know, but beat paying 160 dollars per window for a new assembly that would probably break again!! Good luck!!

Feb 26, 2009 | 2000 Pontiac Bonneville

1 Answer

2000 bonneville, one rear cable on the left rear power window


On my 2000 bville, all four of my windows came off. All four had the same problem. the upper and lower cables go around the pulleys then connect to a plastic piece connected to the track. This plastic piece breaks and lets the cable free. I fixed them all by removing motor assembly and reconnecting the cable with coat hangar wire. Kind of a redneck fix, I know, but beat paying 160 dollars per window for a new assembly that would probably break again!! Good luck!!

Feb 26, 2009 | 2000 Pontiac Bonneville

1 Answer

2000 dodge dakota sport blower motor won't work


Hi my name is Allen!

This is a very hard motor to get out!

This will save you time, if you have a test light and jumper cables, hook the jumper cables to the battery, then hook your test light to the positive side of the jumper cable, turn the ignition key on and turn the blower motor on. Next at the blower motor connector touch the test light to the negative side of the connector if the test light, lights up you have a good ground. NEXT; move the test light to the negative side of the jumper cable and test the positive side of the connector if it lights, you have power coming to the motor, if you have both power and ground you need to replace the motor, if no light on one side you need to repair the one that doesn't light up.

For further assistance contact me at FixYa!

Dec 21, 2008 | 2000 Dodge Dakota Quad Cab

Not finding what you are looking for?
2002 Pontiac Bonneville Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...