Question about Cars & Trucks

Open Question

Larson keyless 6101lm and it will not lock

When pushing the lock button, the lock will not engage

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Murphybanton
  • 2004 Answers

SOURCE: Keyless pad will not work on drivers side

It needs reprogramming. Contact Honda.

Good luck.

Rate this please

Posted on Apr 17, 2009

Ad
  • 1757 Answers

SOURCE: diagnose keyless entry system of 1997 Cherokee

Before replacing any Relay. Try disconnecting the negative side of the battery for at least 2-minutes to de-energize the security system, re-setting itself. The reconnect the battery and try your security (and options) system again.
The only other big question that you will have to know: is this a factory installed security system or an aftermarket security system? This makes a difference in security systems, relays etc.

Posted on Dec 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Larson Tradewinds w/ Intevia Keyless Lock Model 6101LM.All of a sudden you cannot lock it from the outside using the user code.


Once you remove the battery you will need to get the nearest agent to reset your Vehicles computer to make it work correctly again. Best Wishes, Malcolm Campbell.

Aug 20, 2017 | Cars & Trucks

1 Answer

2009 Buick Lacrosse automatic door locks, interior button and fob not working


Have you had it checked to see if DTC'S - diagnostic trouble codes stored in the BCM - body control module ? That's the first thing you should have done . Dealer or other independent reair shop that has a factory or professional type scan tool . Auto part stores can't pull these codes .
The keyless entry system has the following main components:
• The transmitters
• The body control module (BCM)
• The remote control door lock receiver (RCDLR)--When you press a button on the transmitter, the transmitter sends a signal to the RCDLR. The RCDLR receives the signal and sends a serial data message requesting the appropriate function from the BCM.
• Keyless Entry Antenna which is a coaxial cable that runs from the RCDLR to the back glass. It attaches with a 9 volt battery style connection to a grid on the back glass, this style antenna is used to increase range and performance for Keyless Entry and Remote Vehicle Start systems .

Jun 10, 2017 | 2009 Buick LaCrosse CXL

1 Answer

I am not able to use the hand held lock/unlock now. The driver door lock tries to work, but it won't. If I push the lock down manually, it will lock all locks. What could be wrong?


Note:
Entering the programming mode cancels all learned keyless remotes, so none of the
previously programmed remotes will work. You must reprogram all of the keyless
remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the
system from exiting the programming mode.

1. Turn ignition switch to ON (II)
2. Press the LOCK or UNOCK button on one of the remotes. (An unprogrammed
remote can be used for this step.)

3. Turn ignition switch to LOCK (0)
4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used
in step 2

5. Turn the ignition switch to ON (II)
6. Press the LOCK or UNLOCK button the same remote. Make sure the power door
locks cycle to confirm you are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make
sure door locks cycle after you push each remote button to confirm system has
accepted the remote.

8. Turn the igniton switch to LOCK (0) to exit programming mode.
9. Test remote(s)

Mar 07, 2010 | 2002 Honda CR-V

1 Answer

Diagnose keyless entry system of 1997 Cherokee


Before replacing any Relay. Try disconnecting the negative side of the battery for at least 2-minutes to de-energize the security system, re-setting itself. The reconnect the battery and try your security (and options) system again.
The only other big question that you will have to know: is this a factory installed security system or an aftermarket security system? This makes a difference in security systems, relays etc.

Dec 27, 2009 | 1997 Jeep Cherokee Country

1 Answer

Anti-theft has engaged


sounds like the transmitter in the key head is defective or it lost programming, try these programing steps, if that doesn't do it u need another key made.

Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door
locks will cycle to confirm programming mode.
2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm
programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to
confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Apr 19, 2009 | Mercury Mariner Cars & Trucks

1 Answer

Keyless pad will not work on drivers side


It needs reprogramming. Contact Honda.

Good luck.

Rate this please

Apr 17, 2009 | Honda Accord Cars & Trucks

1 Answer

Keyless remote


Note:
Entering the programming mode cancels all learned keyless remotes, so
none of the previously programmed remotes will work. You must reprogram
all of the keyless remotes once you are in the programming mode. You must complete each step within 4 seconds of the previous step to keep
the system from exiting the programming mode. You must program remotes
within 10 seconds of each other

1. Turn ignition switch to ON (II)
2. Within 4 seconds press the LOCK or UNOCK button on one of the remotes.
(An unprogrammed remote can be used for this step.)

3. Within 4 seconds turn ignition switch to LOCK (0) position
4. Within 4 seconds turn the ignition switch to ON (II)
5. Repeat steps 2, 3 and 4 two more times using the same keyless remote
used in step 2

6. Within 4 seconds press the LOCK or UNLOCK button on the same remote.
Make sure the power door locks cycle to confirm you are in programming
mode.

7. Within 10 seconds press the LOCK or UNLOCK button on same remote.

8. Within 10 seconds press the LOCK or UNLOCK button on all other
remotes you want to program. Make sure door locks cycle after you push
each remote button to confirm system has accepted the remote.

9. Turn the igniton switch to LOCK (0) to exit programming mode.
10. Test remote(s)

Dec 24, 2008 | 1998 Acura TL

1 Answer

Keyless Entry and Remote


I have had this problem take you drivers door put your key and un-lock from the out side with key (NO) then open the door push un-lock from the inside button and then set from you remote and it should set if not push un-lock then lock and then do the un-lock with the key. Let me know if that works. what my car did was locked from the inside and I had the problem were it would not work till I un-locked from the out side plus I had to go to radio shack and change the battery from the control.
Hope good happens.
Nikki2913

Oct 22, 2008 | 1996 Ford Explorer

1 Answer

Keyless reprogram


resychronizing the key works.

1. Insert key into ignition and turn to
position 2.
2. Remove key and hold down lock button
while pushing unlock button five times.
3. Release all buttons, then push either lock or
unlock button.
!!!!!!!!!!!!!Procedure must be completed within10
seconds.!!!!!!!!!!!!!!!!!!!

Oct 06, 2008 | 2001 Mercedes-Benz M-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...