Question about 2001 Ford Windstar
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Intake manifold-to-cylinder head bolts for 5.0L V8:
Step 1 = 96 in-lbs Step 2 = 16 " Step 3 = 23 to 25 "
Numbers taken from an after market manual, so use at your own risk.
Posted on May 09, 2009
These torque specs are from the Haynes manual (Ford pick-ups 97' - 03') This is a 2- step proccess. step-1 44-in-lbs step-2 89-in-lbs. There are 14 bolts that hold the manifold in place, tightening sequence goes as follows: start from the center( WORK IN A "X" PATTERN)
Posted on Oct 08, 2010
two passes ,start in middle and just nip each bolt working outwards left to right ,then a then a pull with the 3/8th drive rachet till they feel right ,about 15lbs but i never use a torque wrench ,too lazy to go to the stores and book it out with all the paperwork and wait in the queue
Posted on Dec 12, 2010
Tips for a great answer:
Mar 19, 2018 | 2003 Ford Windstar
Jan 25, 2017 | 2000 Oldsmobile Silhouette
Oct 03, 2016 | 2003 Ford Windstar
Jun 24, 2016 | 2003 Dodge Intrepid
Dec 21, 2015 | 1998 Ford Windstar
Jun 17, 2014 | 2003 Pontiac Grand Am
May 07, 2010 | 2001 Jeep Cherokee
May 17, 2009 | 2000 Ford Windstar
103 people viewed this question
Usually answered in minutes!