Question about Chevrolet 1500

1 Answer

How do i change the ignition on a 1992 Chevrolet truck?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

You need to remove the steering wheel (you will likely need a steering wheel puller) and the wheel lock collar (snap ring holds it in place) then remove the signal switch plate.....on the left side of the steering shaft there is a single screw remove it and the ignition switch will slide out(you may need to rotate the switch to the run position.)
hope this helps......Thanks for choosing FIX YA!

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i change a ignition switch

If you have gotten another one, just check under the steering you will the wire that connects to the ignition, remove it from the socket, then loose the nut that is use to screw the ignition then pull it out and fix the new one.

Sep 06, 2011 | 1992 Chevrolet Cavalier

1 Answer

I have a 1992 chevrolet cavileir and i have no spark and i changed the wires,plugs and the coils . and when the car was runnining it had no power like it was only running on 1 cylilinder if u no what it...

this may be caused by a bad crank sensor or an ignition control module, remove the ignition control module and take it to an autopart store like a napa auto parts, there it can be tested, if that tests good then check the crank sensor.

Mar 31, 2011 | 1992 Chevrolet Cavalier

2 Answers

1992 lumina starts, sputters, then dies. replaced the coil packs, plugs, wires, map censor, cleaned the maf censor. any ideas?

About the only things that you have not changed that would cause that problem are the fuel pump, the ECM, (Engine Control Module) or if your vehicle has one it could be the ignition module, and here is an image of what the ignition module will look like, and not all applications will use one.


Jun 10, 2010 | 1992 Chevrolet Lumina

1 Answer

Sometimes ignition doesn't start. Lights come on,

Change ignition switch. It is 18 years old. Not key cylinder,switch

May 07, 2010 | 1992 Chevrolet S-10

1 Answer

1992 chevy lumina has no spark checked coils and changed ignition module still no spark


Jan 01, 2010 | 1992 Chevrolet Lumina

1 Answer

1992 Chevy Blazer Ignition Diagram

trying to remove the ignition from my steering column having problem getting the turn signal switch from the column

Oct 25, 2009 | 1992 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides