Question about 1999 Ford Crown Victoria

Open Question

Transmission car won't move

Changed alternator after car was sitting for several months. Now the car will not move foward or reverse

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: no reverse

i had the same problem it is your reverse band has broke , trans has to be taken apart , its about a 60.00 part and a lot of labor

Posted on Apr 09, 2009

95_Bravo
  • 16 Answers

SOURCE: Transmission will only go into reverse

I would check the linkage and if it is all connected and working then the problem is internal. A pump can go and leave no shavings or metal flakes in the pan.

To check the linkage put the truck on ramps, support it with jackstands crawl under the truck while someone sits in the drivers seat with the parking break on. Watch the linkage levers on the transmission as the person in the truck moves the shift lever (while firmly mashing the breaks) also listen for a distinct "clicking" sound in the transmission as it moves through the gears. Again if the linkage is okay and it sounds like things are moving with the shift leaver then the problem is most likely a worn pump.


Posted on May 10, 2009

  • 55 Answers

SOURCE: transmission issue

sounds like the revese clutch is broken. a rebuild or used transmission is your only choices

Posted on May 27, 2009

pchambley
  • 334 Answers

SOURCE: The car won't shift into

Make sure the level is correct..If so I would replace the transmission filter ,,could be clogged up

Posted on Sep 05, 2011

  • 133 Answers

SOURCE: 1996 Ford Taurus Won't Shift

Your transmission is toast. Smell the fluid on your ****** dipstick. It will smell really burnt.

Posted on Feb 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission fluid hose burst, fixed it, add fluid now the car won't move...


Two litres? Unless you are outside the USA, transmission fluid generally comes in quart containers. If you only added 2 quarts, yes, it's very possible the fluid level is low. However, you don't want to add too much. There should be a dip stick for checking fluid level. Run the vehicle until the engine is good a warm, about 15-20 minutes, and then check the fluid level. Add as needed. But remember, don't add too much. Add a little at a time, as you get close to full.

Feb 05, 2013 | 1999 Oldsmobile Alero

1 Answer

I have a strong reverse in my 1998 blazer's auto transmission but no foward gears work. Do I need a complete overhaul or change the filter and solenoid?


After making sure trans is full on trans fluid and checks good next try cleaning out the electrical plug, BIG GREY PLUG with lots of wires on the top side of trans, passenger side right next to exhaust. Sometimes they get water in them and short them out causing them to not shift. Also check the fuses inside. Look for shift solenoid. There should at least be one or two. If fuses and plug all check out good it is possible that solenoids are bad. A bad sparg assembly could also cause problem Inside trans. Let me know what you find. If still no forward pull down in first gear and see if it move. If so trans will need to be removed.

Jan 23, 2013 | Chevrolet Blazer Cars & Trucks

2 Answers

1999 FORD EXPERDITION TRANSMISSION WON'T MOVE FORWARD BUT MY REVERSE WORKS FINE WHAT I NEED TO DO


You can try shifting into manual 1 to get moving then once you get going shift the lever up into Drive. This should work, then drive it to a shop to have your ****** looked at.

Feb 08, 2012 | 1999 Ford Expedition

1 Answer

1996 Ford Taurus Won't Shift


Your transmission is toast. Smell the fluid on your ****** dipstick. It will smell really burnt.

Feb 04, 2012 | 1996 Ford Taurus

1 Answer

Changed starter and now transmission won't engage in reverse. What happened?


is the level of fluid ok ? im afraid your transmission went bad not because of the starter change but it just happen at that time

Jan 10, 2012 | 2003 Kia Sedona

1 Answer

Transmission trouble, only drives in reverse won't drive forward.


foward input shaft broken

replace the transmission

Jun 18, 2011 | 1992 Dodge Dakota

1 Answer

Bought a 98 1500 Laramie 2 wheel drive w transmission problems. runs fine in foward, but just doesnt move at all in reverse. any idea what the problem might be in the transmission?


common problem for the dodge, you have a bad or broken reverse band in the transmission, the transmission will have to be removed and rebuilt or replaced, check with your local salvage yard for a good used one could save you several hundred dollars.....GOOD LUCK

Dec 03, 2010 | 1996 Dodge Ram

1 Answer

Transmission issue


sounds like the revese clutch is broken. a rebuild or used transmission is your only choices

May 27, 2009 | 1999 Ford Expedition

1 Answer

Transmission will only go into reverse


I would check the linkage and if it is all connected and working then the problem is internal. A pump can go and leave no shavings or metal flakes in the pan.

To check the linkage put the truck on ramps, support it with jackstands crawl under the truck while someone sits in the drivers seat with the parking break on. Watch the linkage levers on the transmission as the person in the truck moves the shift lever (while firmly mashing the breaks) also listen for a distinct "clicking" sound in the transmission as it moves through the gears. Again if the linkage is okay and it sounds like things are moving with the shift leaver then the problem is most likely a worn pump.


May 09, 2009 | 2000 Ford F150 Flareside SuperCab

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...