Question about 2003 Buick Rendezvous

Open Question

Where is the evap. vent solenoid on a 2003 buick rendevous

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Cigarette lighter does not work for my 2006 Buick Rendevous

i had the same problem with my 2003...it was # 32 fuse under the hood labeled front auxillary

Posted on Apr 26, 2009

  • 3 Answers

SOURCE: Steering wheel locked up and ignition won't turn

Try pulling the wheel as far one direction as it will go in the locked position. Then while holding the wheel, turn the key. This has worked for me everytime (3x) I have experienced this.

Posted on Jun 12, 2009

autotherapis
  • 501 Answers

SOURCE: the shifter cable came loose

The end of the cable on the GM is a molded plastic piece. Part of the cable. If the plastic tab has broken off you really only have two choices.

  1. Replace the entire cable, a tough job.
  2. push the plastic end back on the arm of the trans shifter and use two zip ties in a cross patter to tighten it down. I have seen this work if done right for years.
Hope this helps.

Posted on Sep 21, 2009

Testimonial: "at least he knows what I am talking about, but did not quite answers my question. "

  • 615 Answers

SOURCE: anti lock and trac off lights on in a 2003 buick

Probably pointing to one or more of your wheel speed sensors having problems. Have the ABS codes scanned on the vehicle. This should help give direction on where to look next. Also, check tire pressure, as uneven pressure can cause this condition.

Posted on Oct 23, 2009

flbergeron68
  • 541 Answers

SOURCE: where is the thermostst for a 2003 buick rendevous

in the thermostat housing. follow the top radiator hose to the housing, drain coolant from radiator, remove housing and voila ! replace with new thermostat and the rest is reverse procedure

Posted on Jul 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Evap System, 2003 Buick Century, PO446 , Engine light on


P0446: Evaporative Emission System Vent Control Circuit
Probable cause:
  1. Sensor or solenoid faulty
  2. Connector terminal contact damaged or corroded
  3. Wire harness fault. Check for correct voltage, open, short to ground or short to voltage
  4. Control unit software needs updating
  5. Powertrain or Engine Control Module faulty
  6. Vacuum leaks, damaged hoses or incorrect routing
  7. EVAP system - Check fuel cap, canister, valves or components

Jun 08, 2017 | 2003 Buick Century

1 Answer

Where is purge valve solenoid located?


Mar 16, 2014 - 2 posts - ‎1 author
I have a 2003 Vue 3.0L 2wd.After fueling I have trouble starting, it cranks but I have to pump it a couple of time then it starts, Sometimes after it ... 2008 Saturn Vue Purge valve canister solenoid location ...
9 posts
Aug 24, 2013
access to vent valve solenoid - SaturnFans.com Forums
2 posts
Jan 20, 2013
Service engine soon light: P0440 - SaturnFans.com Forums
6 posts
Apr 15, 2010
Code P0446 (evap solenoid) and now I can't fill the gas ...
16 posts
Nov 17, 2007
More results from www.saturnfans.com

EVAP Solenoid Location - YouTube

? 2:17
https://www.youtube.com/watch?v=jIKaPF2Yw3I
Mar 20, 2007 - Uploaded by richpin06a
Saturn EVAP Solenoid Location. ... How To Test and Replace EVAP Canister Vent Control Valve P0446 - Duration: 6:18. by CarsNToys ...

EVAP Purge Solenoid Removal - YouTube




Dec 11, 2015 | 2003 Saturn VUE

1 Answer

How to fix 05 buick rendevous po443 code?


p0443 is a EVAP code. The EVAP system deal with the vapor of your fuel tank. The definition of P0443 is EVAP purge valve circuit malfunction. The purge valve solenoid is locate on a support on the motor. There is 2 plastic hoses, one from the fuel tank and the other going to the trottle body. The most commun cause is a broken wire at the purge valve solenoid connector. The second most commun cause is the purge valve solenoid itself.

Sep 05, 2014 | Cars & Trucks

1 Answer

2003 Chevy Silverado 1500 5.3L evap emission control system vent solenoid replacement diagram


what yr an makes for a evap solenoid for a 2003 Silverado will enter change if any ?

Jan 15, 2014 | 2003 Chevrolet Silverado 1500

1 Answer

What do i need to fix with my 2002 buick rendevous diagnosis showing code # po449


P0449 BUICK Description The Engine Control Module (ECM) monitors the Evaporative Emission System (EVAP) Vent Valve/Solenoid system wiring for opens or shorts. Could be a problem with the vent solenoid or other component of the fuel tank venting system.

Read more: http://engine-codes.com/p0449_buick.html#ixzz21r2pw0wE

Jul 27, 2012 | Buick Cars & Trucks

2 Answers

Where is the evap purge/vent solenoid located on the Cadillac CTS 2003


It is located under the car near the gas tank on a tray with the fuel vapor storage cannister

Jul 09, 2011 | 2003 Cadillac CTS

1 Answer

I have a 04 buick rend and i'm getting the p 0449 code how can i find out what it is and where


CODE PO449 - EVAP VENT SOLENOID CONTROL CIRCUIT MALFUNCTION CONDITION. FIRST CHECK EVAP SOLENOID FUSE.IF ALL IS GOOD EVAP VENT SOLENOID LOCATED ON A BRACKET NEXT TO FUEL TANK.

Oct 13, 2010 | 2006 Kia Spectra

2 Answers

Getting an engine code 1450 on a 2003 ford Explorer 4.0 SOHC. Cleaned and inspected EVAP canister vent solenoid. Replaced EVAP canister purge valve. Any suggestions?


Did you check the block box connected to the vent solenoid? There's a hose that comes off it that appears to run nowhere, that's the fresh air vent. If it's blocked it won't allow air into the system which will set the trouble code. If that's clear, the vent solenoid itself is bad and needs to be replaced.

Jun 27, 2010 | 2003 Ford Explorer

2 Answers

My 2002 Chevrolet Suburban shows code 446. What does this mean?


I think that you are talking about the OBD Code P0446, here's the "official" word on the subject. I'm sure this will take care of it for you.

Subject: LR4, LM4, LM7, L59, LQ9, LQ4, L18 DTC P0446 (Restricted/Blocked EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Vent Solenoid and Bracket) #04-06-04-055A - (03/20/2006)

Models:
2000-2003 Cadillac Escalade
2002-2003 Cadillac Escalade EXT
2003 Cadillac Escalade ESV
2000-2003 Chevrolet Suburban, Tahoe
2002-2003 Chevrolet Avalanche
2000- 2003 GMC Yukon, Yukon XL

with 4.8L, 5.3L, 6.0L, 8.1L Vortec™ V8 Engine (VINs V, P, T, Z, N, U, G -- RPOs LR4, LM4, LM7, L59, LQ9, LQ4, L18)
--------------------------------------------------------------------------------

This bulletin is being revised to add updated warranty information and enhance the content. Please discard Corporate Bulletin Number 04-06-04-055 (Section 06 -- Engine/Propulsion System).
--------------------------------------------------------------------------------

Condition
Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel SES light, with a DTC of P0446 (Restricted/Blocked EVAP Vent Path) being set.

Cause
Dirt and dust intrusion into the EVAP canister vent solenoid, resulting in restricted air flow, may cause this condition.

Correction
DO THIS: Replace the EVAP vent solenoid with a more robust vent solenoid.

DON'T DO THIS: DO NOT Replace the EVAP canister or other EVAP parts.

After following the Service Manual diagnostic P0446 and determining that the EVAP canister vent valve is the cause of the SES light, replace the existing EVAP canister vent solenoid and bracket. This new vent solenoid has an enhanced filtering capability and a filter element that can be easily removed and cleaned. To ensure correct installation, follow the procedure below.

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the bolt retaining the vent valve bracket.
Disconnect the electrical connector.
Disconnect the canister vent valve hose.
Install the new vent valve bracket, P/N 15105605, to the vehicle with the retaining bolt.
Tighten
Tighten the bracket mounting bolt to 12 N·m (106 lb in).

Install the new vent valve, P/N 10382105, to the bracket.
Reinstall the electrical connector.
Reinstall the canister vent valve hose.
Lower the vehicle.
Clear the DTC.
Parts Information
Part Number
Description
Qty

15105605
Bracket, EVAP Emission Canister Purge
1

10382105
Valve, EVAP Emission Canister Control
1


Warranty Information
For vehicles repaired under warranty, use:
Labor Operation
Description
Labor Time

J6441
Valve, Evaporative Emission Canister Vent Solenoid and Bracket - Replace
Use Published Labor Operation Time

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION

© Copyright General Motors Corporation. All Rights Reserved.
END QUOTE

Hope helps with this (remember rated this) Good luck.

Jan 24, 2010 | 2002 Chevrolet Suburban

Not finding what you are looking for?
2003 Buick Rendezvous Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...