Question about Cars & Trucks

Open Question

Need perdana V6 O2 sensor wiring diagram male and female socket

Male wire colour 2 black, white and blue female wire colour 2 black, white and red.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 17 Answers

SOURCE: o2 sensor wiring diagram

A new 02 sensor will come with new wires and connector. If not get back with me I think there is a repair kit for that problem.

Posted on Jun 01, 2009

  • 1 Answer

SOURCE: Replacing 2004 Hyundia Elantra O2 Sensor

Had the same problem You need to go to dealer and order an O2 sensor with California emissions. The wire will be longer and fit into the prong

Posted on May 08, 2009

  • 164 Answers

SOURCE: I just found where the O2 sensor is located, it is

What are you try do you dont need know wires uless your weld back a new one on. Os are so you burn un burned gas if there not working replace them . You get check engine light mine went out at 100k

Posted on Jul 21, 2009

ZJLimited
  • 17970 Answers

SOURCE: 2000 maxima i replace the o2 sensor but the wire

Are you sure that have 3 wires? For Nissan say 3 wires.

This is the alterative wire:
Signal + --->> Black -->> Black
Signal - --->>
Heater --->> White -->> Red
Heater --->>White -->> White

Review this information: Bosch Universal O2 Sensor (check the Universal sensor types and color identification )

Hope helped with this (remember rated this help) God luck.

Posted on Dec 02, 2009

noranda21
  • 1547 Answers

SOURCE: replaced clutch in 1999 toyota corolla. When trans

auto parts store has books you can look at for free sorry couldnt help you more

Posted on Dec 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1996. Which color wires go where?


There should have been an instruction sheet in the box with the sensor. If not, you may have to go back to the store and ask for one.
Most sensor brands are different.

Sep 16, 2015 | Mazda B2300 Cars & Trucks

1 Answer

I have a 1993 mercury villager my o2 sensor has 2 blues a white and a black and the wiring on the van has a black red and white and i need to know what way to wire them


Sounds like the wrong sensor for the car. The correct sensor would also have 3 wires: a signal wire, a ground, and a voltage, reference voltage wire. The 4 wire sensor sounds like it might be a Heated Oxygen Sensor, not applicable on your car.

Dec 29, 2013 | 2002 Mercury Villager

1 Answer

2008 Jetta upstream O2 sensor


Right do you mean the wires to the O2 sensor from the loom or the wires from the plug to the sensor ,So i will explain what i know here and thats all i can do for you.On our europeon motors their is a 4 and 3 wire O2 sensor type,now on the sensor side of the plug their will be two wires the same colour normally white or gray ,these two wires are the heater circuit so should show a resistance with a meter ,now the coresponding two wires in the loom plug should read 12v with the plug disconnected ignition on .Now the other two wires are for the readings so push a pin through each cable and then with engine running plug connected you should read 0-point something which varies with engine speed somewhere between point 7 to point 2 varying with speed .if it stays around the point 4 mark then replace as its not working correctly ,you should be able to read the voltages with a code reader though

Jun 05, 2013 | Cars & Trucks

4 Answers

My trooper is giving like 6 miles to the gallon its a V6 2.8 engine. I dont know where th oxygen scensor connect.


Hello! I have the wiring to your engine and perhaps a solution...The wire color from the ECM on Connector D pin #7 is White/Green and goes to the O2 sensor...The color at the O2 sensor is Black...White/Blue is connector D pin #1...wire colors that have aged are easily mistaken White looks Yellow with age...connect the O2 sensor to D-7...The O2 sensor is White/Green NOT White/Blue (which looks like Yellow/Blue) this wire is the Check Engine Connector...Tell me how many wires are either cut or misplaced? If we eliminate wiring we can concentrate on why your getting 6 miles /Gal...

If the vehicle backfires or runs poorly My next suggestions are to check the plug wires to be sure they are in the correct place...and #2 to check the timing...the left bank=1, 3, 5 and the right bank=2, 4, 6...Firing order is1, 2, 3, 4, 5, 6...CCW on the distributor...Stick with me and we'll have it purring. see timing below...
saailer




11_9_2011_11_53_11_am.gif

Jul 14, 2011 | 1990 Isuzu Trooper

1 Answer

I need to know which wire on the 4 wire oxygen sensor (2 white, one grey one black) is the heat wire on a ford f-150 o2 sensor?


Hello! There are four O2's...Each O2 heater, left and right bank, front and rear, has it's own wire colors...These colors are "at the connector"...First series are the control ground sent by the PCM..
RR=White/Black...RF=Red/White...LR=Tan/Yellow...And LF=Yellow/Light Blue...........This series are the battery leads, hot when fuel pump relay pulls...RR=Violet/White...
RF=Red/Yellow...LR=Violet/White...LF=Red/Yellow...

If you have any questions feel free to ask...Guru...Saailer

Oct 20, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

1995 Isuzu Rodeo 4X4 3.2 5 speed manual, reverse lights on in 1st


the wiring on the gear box is connected to switches wrong, there bullet head connectors red to red wiring and blue to blue from switch to loom is correct
both wires on one switch are red connect these to the 2 red wires one has colour trace on it also. the other switch blue wires to blue wire on loom with possibly another colour wire but they are together. you cant go wrong the connectors are male on one wire and female on the other on each switch(detent switch)

Nov 22, 2009 | Isuzu Rodeo Cars & Trucks

2 Answers

I need the wire color code for a 1999 toyota camry o2 sensor


Well - I'm not sure which one you mean - front or rear - here is a wiring diagram that should help you though.


2d7d015.jpg

Sep 18, 2009 | 1999 Toyota Camry

1 Answer

O2 sensor wiring diagram


A new 02 sensor will come with new wires and connector. If not get back with me I think there is a repair kit for that problem.

Jun 01, 2009 | 2002 Ford Explorer

1 Answer

1955 x-type towbar wiring diagram


Colour Terminal Purpose Looking at the Socket towards the plug.
Looking at the Plug towards the socket. Yellow 1 (L) LH Indicator wd_black_socket.jpg Blue 2 (54G) Rear Fog Light (or Aux.) White 3 (31) Earth Green 4 (R) RH Indicator Brown 5 (58R) RH side Light Stop Red 6 (54) Lights Black 7 (58L) LH Side Light

Apr 07, 2009 | 2005 Jaguar X-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...