Question about Peugeot Cars & Trucks

Open Question

Reset self adjuster clutch cable peugeot 206 - Peugeot Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22114 Answers

SOURCE: need instructions on how to fit auto adjusting peugeot 206

cant honestly say i have fitted one on this model,but is it full auto or is their an adjuster on the back of the clutch pedal.??? look first.Ford escort one is a bit of a pig but easy when you have the knack same as a golf easy when you know how .Now golf cable comes with two plastic ties that hold auto adjuster together and you dont relaese them till the cable is fitted.Can you describe the set up then i might be able to help some more.American web site so a lot of models not listed here and the lingo take a bit as well ,i mean whos ever heard of pigs tails or fire wires.Well what else can you expect when they are not taught the queens english and dont drink tea, just waste it by throwing it in the sea.

Posted on Mar 05, 2009

  • 4793 Answers

SOURCE: peugeot 206 clutch fitted but now it wont start...

did you connect the earth strap from the engine to the body ???

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi guys I have a 2005 peugeot 206. I have recently installed a new clutch. Everything was installed corectly and tightened accordingly. Once i put the gear box back on and turned on the car i cant get any...


sounds like the trust bearing has not been installed this fits on the fork in the clutch house that engages the clutch to release so gears can be changed, if its not locked in place it will not catch the clutch and is probably sitting in the bottom of the clutch housing.

Jul 17, 2017 | Peugeot Cars & Trucks

1 Answer

Clutch biting point very high on peugeot 206sw 1.4dhi it it about to fail


The reason for the high biting point is simple. The clutch is made of 3 main components.
The pressure plate friction plate and the release bearing.
The more times clutch is depressed the concentric spring fingers wear in 2 ways . Firstly by good old metal to metal rubbing and secondly the concentric spring fingers don't return as far as a new one causing the release bearing or csc to adjust .
When the pressure plate concentric spring gingers wear they don't sit proud and require more pedal effort to depress. .
When they loose there spring like feature they require a greater distance from the release bearing. Or it has to travel further to depress them to lift The pressure plate and fee the friction plate from the lay shaft on which it is splined onto to give you drive once released.
The further back the bearing has to travel to allow the fingers to clamp the pressure plate to the friction plate . The more the clutch has become worn and unserviceable.
Self adjustment on hydraulic clutches are a hard one to gauge as you have no idea how far the piston has moved out to compensate for this wear . With a cable you can physically see the wear and adjust .
High biting points on any car are useless. You want a biting point to be 2 to 3 inches from the top and not nearly level with the brake pedal.
Anyway it seems apparent that Peugeot and Citroen both have high to almost no point at which they bite .
I myself would modify this as an engineer.
But it seems to be normal on these cats to have absolutely no biting point worth talking about.
My sisters 2012 206 1.4 is a very high biting point and I myself would not be happy with it . It gives u no indication of a worn clutch if its self adjusting.
Alll hydraulic clutches are self adjusting. So why are Peugeot and Citroens sooo high. Its ridiculous.
A very idiotic idea and I'm taking it back with her and I'm complaining. Hopefully I should get somewhere and ill update you all

Jul 02, 2012 | Peugeot 206 Cars & Trucks

1 Answer

206 w reg fitted new clutch but now have no biting point so car will not pull away help


Hello, Who installed the clutch"? Were there a new pressure plate installed? Were there a new throw out bearing installed. Does this 1991 Peugeot 405 have hydraulic or mechanical clutch linkage?
There a couple of reason why the Peugeot wont move and engine is running and the transmission is in gear.

1.. Pressure plate is installed backwards.--Remove transmission and reinstall pressure plate in the correct orientation to the clutch. There is two ways to install it, but one way correctly.

2. Adjustment for the clutch linkage from the pedal in the driver compartment is adjusted to tight and not releasing the clutch to where the clutch pressure is on the pressure plate.



I hope this helps. GB....stewbison

Aug 24, 2011 | 1991 Peugeot 405

1 Answer

Peugeot 206 clutch fitted but now it wont start


did you connect the earth strap from the engine to the body ???

May 17, 2010 | Cars & Trucks

1 Answer

How can I adjust my 1996 Peugeot 405 clutch cable


My 405 had a self adjusting clutch but the BX box fits and they were adjustable, take out the airfilter and pipes, grab the end of cable and pull hard, if it releases then it is a working self adjuster, if not look for the adjuster nut, some are fitter on a bell-crank near the starter (13mm) others are 10mm nuts on the end of the inner cable.

Mar 10, 2009 | 1991 Peugeot 405

1 Answer

Need instructions on how to fit auto adjusting peugeot 206


cant honestly say i have fitted one on this model,but is it full auto or is their an adjuster on the back of the clutch pedal.??? look first.Ford escort one is a bit of a pig but easy when you have the knack same as a golf easy when you know how .Now golf cable comes with two plastic ties that hold auto adjuster together and you dont relaese them till the cable is fitted.Can you describe the set up then i might be able to help some more.American web site so a lot of models not listed here and the lingo take a bit as well ,i mean whos ever heard of pigs tails or fire wires.Well what else can you expect when they are not taught the queens english and dont drink tea, just waste it by throwing it in the sea.

Mar 05, 2009 | 1991 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,038 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...