Question about 1998 Dodge Durango
Was running last night, my brother took out the engine computer and put in his to see if the computer was his problem. When he put my computer back in is when this started.
Reset system. Try disconnecting vehicle's battery for 30 minutes, and then try again.
Posted on Oct 30, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Try cam and/or crank sensor. If crank to cam timing isn't detected properly it'll crank all day but won't start. I had similar problem on my 2.5L V6 Avenger....drove home fine, no engine light, next morning it cranked, but wouldn't start. The crank sensor was faulty.
Posted on Jan 22, 2009
Your window regulator is broken. You are not going to fix it or put the "spring" back on. You will need to replace the entire window regulator. (There will be lots more room for your hands this way too!) The regulator assembly looks like the picture below. It is available at AutoZone, Oreilly"s, Napa, Carquest, and several other parts retailers It will cost you about $90 (U.S.) give or take a few depending on where you live.
Posted on Jun 04, 2011
Testimonial: "This makes so much sense. Thank you for your help!"
Check that the crank shaft position senser is plugged in and working and not broken this will cause your comp to not send fire to you coil and it won't fire hope this helps you
Posted on Oct 16, 2011
Tips for a great answer:
Jan 04, 2017 | Dodge Cars & Trucks
Sep 12, 2015 | Dodge Cars & Trucks
Feb 19, 2015 | 2003 Dodge Durango
Feb 09, 2013 | 1999 Dodge Durango
Dec 18, 2012 | 1999 Dodge Durango
May 08, 2012 | 1999 Dodge Durango
Jan 13, 2012 | Dodge Cars & Trucks
Sep 08, 2011 | 1999 Dodge Durango
Jan 08, 2009 | 1999 Dodge Durango
Oct 15, 2016 | 1998 Dodge Durango
323 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: