Question about 2000 Cadillac Seville
Service security system light comes on, battery drains
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The service engine soon light indicates you have a problem with the engine management system.The only way to get it to stay off is to lacate and repair whatever is not working correctly. Requires very specialized equipment. Take it to your mechanic.
Posted on Nov 28, 2008
First thing you have to do is list all the codes, because some some might be stored for a long time. Pushing the OFF and WARM buttons together and holding will ghive you all the stored codes. Then press OFF and HI together to clear all codes. Hold and wait for bars or 0's. Now start your car and let it get up to proper operating temps. Take car for aride that aincludes all phases of driving including highway speeds. Observe SERVICE ENGINE LIGHT for coming on . Assuming it does , repeat steps previously provided, read codes stored and repair accordingly. If need be contact me with new codes and I will try to assist you.
Posted on Mar 16, 2009
No it wouldn't be a fuse because it's partially still working,LEDs are wired in series so it could be one LED is burnt out or the current limiting resistor has opened for that section.Repairing it would be fairly simple but will require a multimeter preferably with a diode tester and a soldering iron.If you're not familiar with using a multimeter and testing electronic circuits I would say let a professional repair it or replace the whole unit.Comment back and I will give you the test procedures if you fell confident in making the repair.
Posted on May 28, 2009
SOURCE: abs light/traction control light
You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.
Posted on Sep 15, 2009
Very easy, just remove front tires and unbolt, BUT I doubt you are asking right question. Not mounts, but mount in dead front center is problem. There are 4 mounts, transmission center back, left center and right center and front center. That takes full torque of motor and heat from exhaust. GM has a shield for exhaust.
Posted on Mar 01, 2010
Tips for a great answer:
Mar 21, 2016 | Cadillac Cars & Trucks
Jul 28, 2014 | 2000 Cadillac Seville STS
Jan 23, 2014 | Cars & Trucks
Mar 09, 2013 | 2002 Cadillac Sts
Aug 19, 2011 | 2001 Cadillac Sts
Jan 02, 2011 | 2005 Cadillac STS
Sep 09, 2010 | 2008 Cadillac STS
Jun 04, 2010 | 2005 Cadillac Escalade
Jul 10, 2009 | 2002 Cadillac Sts
139 people viewed this question
Usually answered in minutes!