Question about 2004 Pontiac Vibe

Open Question

Put new outside door handle on pontiac vibe but it won't open the door

We followed the directions found in a good you tube video but for some reason the door will not open from the outside

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 733 Answers

SOURCE: How to install a pontiac G6 driver door handle

Yeah, you have to remove the lock. Use an impact drill with the right phillips head to remove the screws. if you try to take them out with a screw driver, you will strip them. Remember...impact drill.

Posted on Nov 30, 2009

bayyagg
  • 1672 Answers

SOURCE: How to I replace the outside door handle on a

hey

Posted on Dec 02, 2010

  • 200 Answers

SOURCE: my drivers door inside handle

It is likely that the linkage to the handle has come loose. You will need to remove the door panel to fix this problem.

Posted on Aug 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't my driver's door open from the inside on my 2007 Ford Fusion?


Pull on the outside handle up once, then reach inside through the open window and unlock the door, try this and it may correct it self

Mar 04, 2013 | Cars & Trucks

1 Answer

Drivers door won't open from outside


remove door panel,peel back water barrier on top left side,remove 10mm bolt on back of door handle,in top of door jam remove 10mm bolt and Phillips screw right below bolt,carefully pull out door handle and remove rod from it,contact Volu parts in Atlanta Ga at 1-888-280-4057 and order white plastic pivot arm,they will know what you need. remove metal drift pin from handle by squeezing with pliers lightly!!! and pulling remember most handle parts are plastic and old be careful. the only door handle new is OEM and over 100.00 and you have to paint to match car.

Jan 26, 2013 | 1998 Volvo V90

1 Answer

2000 Chevy S10 passeger door won't open


Remove the door panel and inspect the latch rods for damage or broken retention clips. A video is below of how to remove the panel.

Nov 06, 2012 | 2000 Chevrolet S-10

1 Answer

Outside door handle won't open door


replace bar linking inside with outside handle undo handle remove square bar inspect both parts replace which ever is worn or broke

Apr 06, 2012 | 1990 Jaguar XJ6

1 Answer

97 Mercury Mountaineer driver side door won't open. Outside handle flops around; inside handle won't open door


Try a slim jim first, down the side of the window. Or AAA or locksmith. If no luck, remove the seat first. Find the screws and bolts around the door handle and arm rest. Most Ford's have screws around the outer side of the panel. I don't believe your's does. The panel lifts or pops off. Once the panel is off, you can reach down and open the door. Just a note. I have done some to where the panel came out in pieces.

Mar 14, 2012 | 1997 Mercury Mountaineer

1 Answer

I need a diagram of the locking mechanism in my 2001 nissan sentra so that i can use a slim jim to unlock the passenger side door.


I don't have a diagram of the door but if you slip the slim Jim in over the top of the outside door handle it should catch on the latch bar. If you are doing this because the door won't open from the interior handle or the outside handle the problem most likely isn't the lock. The way that handle connects to the release it is held in place with a piece of plastic that breaks fairly easy. If that piece breaks the interior door handle won't activate the unlock function when pulled and you will have a heck of a time getting the door opened so you can get inside the panel to do the repair.

Oct 05, 2011 | 2001 Nissan Sentra

2 Answers

How to change cabin air filter in 2005 pontiac vibe


it's located behind the glove box. Instructions are in you owners manual. basically you remove the glove box and remove a plastic cover to access the filter. make sure you install the filter right side up. under $10 at rockauto.com

Aug 08, 2010 | 2005 Pontiac Vibe

1 Answer

Can't lock Pontiac Vibe doors with key.


maybe the ign key has been replaced, and the doors dont match? a locksmith could remove one of the locks and make you a new key.

Sep 30, 2009 | 2004 Pontiac Vibe

Not finding what you are looking for?
2004 Pontiac Vibe Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...