Question about Kia Sedona

2 Answers

I installed a timing belt on my 03 kia sedona. a piece of the cover broke off and caused the cam to jump 6 teeth. i reset the timing am now getting code p300 p303 and p305. guess it is time to replace the cylinder head?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Kia Master
  • 1,207 Answers

Yeah, it is time to replace your cylinder, because the P300 meansRandom/Multiple Cylinder Misfire Detected, the P303 means Cylinder 3 Misfire Detected, the P305 means Cylinder 5 Misfire Detected.
__________________
auto diagnostic scanner JBT-CS538C

Posted on Oct 29, 2012

Testimonial: "thanks alot i appreciate your input. you are a big help"

  • Douglas Huff
    Douglas Huff Oct 29, 2012

    this would be the cylinder head by firewall? i will be tackling through the week after work, thanks

  • David Aug 05, 2014

    It's an interference engine so if the timing jumped that much it's a real possibility that you bent most of the valves... Sorry replace both heads

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 470 Answers

It's 6 to 8 hrs flag time. That means 8 hours to replace them by an experienced mechanic
and be charged 8 hours no matter how long it takes him.

Posted on Aug 05, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: how to set a timing on Kia sedona 2002

Here is a diagram this will help you,good luck contact if you need more help. http://www.2carpros.com/car_repair_information/tec_info/2002/kia/sedona/2002_kia_sedona_timing_belt_diagram_marks.htm

Posted on Jan 05, 2009

  • 883 Answers

SOURCE: timing belt

rate me fixya!
from manual:
f2a26de.jpg
6de92c9.jpg
a616c96.jpg
7dcfd0f.jpg
0ee8ed8.jpg
aa4a1f3.jpg
98fc193.jpg
b96b3a5.jpg

Posted on Jul 09, 2008

fischmilch
  • 96 Answers

SOURCE: Labor hours to replace timing belt on 2002 Kia Sedona

6-8 labor hours. But each shop defines labor hours differently

Posted on Nov 07, 2008

motor1258
  • 6674 Answers

SOURCE: 2006 sportage timing belt- how to change

Here you go, just ignore part about removing sprockets. Click on pictures for larger view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801bca65

Posted on Mar 01, 2009

  • 7 Answers

SOURCE: Timing Belt Problem-6 cylinder Saturn wont' start

If your timing belt broke, then it is possible that the valves in your engine got bent, which won't allow the cylinders to pressurize the fuel/air mixture, and it will let all of the mix to flow freely into the intake/exhaust manifold. This can be checked with a pressure tester that is threaded into the spark plug opening. A mechanic should have one, or you can probably find one at an auto parts store.

Posted on May 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I replace the timing belt on a 96 Toyota Camry 2.2 engine why has it jump time I check the belt it was tight will a bad camshaft be the cause


If you find a belt with stripped cogs, it indicates that something in the cam drive system has jammed or stuck, overloading the belt and causing it to shear teeth or jump time. The most likely culprit is the camshaft, which may have seized due to engine overheating or lack of lubrication (low oil level or loss of oil pressure). Check the coolant level, oil level and maintenance records of the vehicle. Toyota has been recommending 7,500-mile oil change intervals for some of its vehicles - which has lead to oil sludging and other engine problems. Changing the oil and filter every 3,000 miles or every three to six months is still the safest recommendation.

Apr 12, 2016 | Toyota Cars & Trucks

1 Answer

2003 kia sportage wont start seems like the timing belt. would the motor be messed up if it jumped time while driving


Oh yes... If the timing belt broke or slipped the valve timing with be off causing the open valve to come in contact with the piston. Before you jump to conclusions take the upper cover off so you can check to see if the belt broke.

Oct 21, 2014 | Cars & Trucks

1 Answer

Timing belt broke.. Car is 1999 Kia Sportage How do I install it ?? What should i be carefull doing ??


Before you spend a dime on parts for that engine, you have to find out if it is a free running engine or intermittent. Meaning the valves will hit the pistons when the belt breaks. If you drove it more than two inches after it broke, It might be shot, You will have to take the rocker cover/s off to check the cam/s and see if they are ok, Get the cover off the front, You will need a tensioner , and belt, the belt should have marks on it to mate up with the cams and crank, The marks will only line up when the cams are in position, you will have to spin the engine by hand to TDC, then turn the cams over to their marks, then put the belt on, making sure they align, Pull the pin on the new tensioner, you will be all set. The marks have to align, if the engine didn't get damaged, go ahead and do the belt, but, if it was damaged, You will need a bunch of stuff, mainly a new engine. The pistons could be shot, the cams broken, valves bent, etc. Not worth fixing, you can buy an engine for less than that. I had an engine go 11 miles before the cam broke in 3 pieces. never heard a thing. Hope this helps.

Aug 29, 2010 | Kia Sportage LX Cars & Trucks

1 Answer

Where is the cam sensor located?


it is under the timing cover at the front of the engine. under the cam belt pulley

Apr 02, 2010 | 2002 Kia Sedona

2 Answers

How to tell if timing belt is still o.k. car will not start has spark and gas.


no gas is usually the fuel pump / injectors / fuel pressure regulator.. The timing belt wont cause you to have no gas!!.

Mar 26, 2010 | 2000 Daewoo Lanos

1 Answer

'03 Kia Sedona EX - ONLY Error Code - Clogged Catalytic Converter - Causing hesitation and 3 mpg reduction in gas mileage. Van in very good condition, 78,000 miles, 1 yr of 500 Miles/wk of Commuting...


Most "common" cause is and engine misfire that causes unburned fuel to enter the converter and overheat/melt the catalyst. The converter is covered by 8yr/80,000 mile warranty for defects, and may be covered thru Kia. On a positive note we have a 2005 sedona shuttle van a work with 250,000 miles on it and qoing strong.

Dec 29, 2009 | 2004 Kia Sedona

1 Answer

Cam belt change on a kia sedona recommended milage


The recommended interval for changing the timing belt is in the owner's manual. Generally, this is every 60,000 miles.

Charlie

P.S. I found the data on the internet and, it is indeed 60,000 miles.

Aug 24, 2009 | 2004 Kia Sedona

1 Answer

How to replace the timing belt on 2004 kia sedona


It's a bit of work for most unless you are a mechanic. I changed my 2003 kia (v-6) Is your a v6? CAUTION: be careful not to lose your timing marks on you dual overhead cams. They will spin a bit when you remove your old belt, due to the tension on the valve springs, so first, turn your crank pulley to the timing mark at top dead center. Also be careful for the timing cover. These are made of really cheap carbon fiber material that will erode upon handling....Again, unless you feel very confident in you mechanical abilities, don't try it....I will soon replace spark plugs on our piece of junk, and I'm not looking forward to that either., but I'm sure for the dealers cost of over $300, I can do it myself, even though I have to remove the whole intake assy.

Jul 16, 2009 | 2004 Kia Sedona

1 Answer

Kia 2002 sedona won't run


Check to see if you have spark, Check the timing belt to see if it is broke or jumped teeth there are marks that need to be alligned on the pulleys.

Reference the below information specifically the Kiatechinfo.com site once registered it is very usefull in ts your vehicle.

Nov 27, 2008 | 2003 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...