Question about 2006 Mercedes-Benz CLK 500

1 Answer

Misfiring on number 3&6 cylinder no power detected st coil pack plug

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

Hi, Try replacing all sparkplugs with new ones. Hope that helps.

Posted on Oct 29, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
davidgrog30
  • 136 Answers

SOURCE: Mercedes Benz W220 misfiring

Presumably you DID check the gaps in the spark plugs before you fitted them? If unsure, remove and: a) check the colour of the deposit (if any) on the plugs ... should be light brown, not black. b) adjust the gaps on the plugs - refer to manufacturer's recommendation. If all this seems to be OK, then test each spark plug lead. It's possible, though unlikely, that in removing the leads from the plugs that one or more has been damaged. Best of good luck!

Posted on Jun 09, 2012

  • 1 Answer

SOURCE: *Owner of Mecedes C230 Model

I know what the problem is. It's going to cost u about $25,000 to fix the problem. Just buy a new car and dump that crappy piece of metal in a river. Mercedes Benz will never be on my wish list ever again. Even the mechanics can't figure out the problem with my check engine light after I pay $2,000 for a check engine light service. They F***** it up even more. My car now is in line to get a heart transplant because it's dying.

Posted on Jun 10, 2011

jasperoni
  • 203 Answers

SOURCE: mercedes c200 elegance 1996 model mis-firing on cylinders 1-4

I beleive your firing order is 1 3 4 2. 1 and 4 are companion cylinders-meaning the piston is up or down at the same time i.e. compression and exhaust stroke both pistons are up and even on the exhaust stroke the ignition fires in order to burn unburnt fuel/ h ve you checked your trigger. There is a good coil testing tool that is placed over the coil and has a magnetic pickup that allows you to see if the coil is being triggered-just because you have power doesn't mean that you will have spark. I would replace your ignition wires and look at your wiring harness very carefully- if it is very brittle and you see bare wires exposed that is your most likley problem because the trigger is working for 1 and 3 and has the crank senser input for all for spark plugs and the cam senser is used for ignition advance and your fuel injection system. try wiggling your harness and see if your coils start to work. wireharnesses are a major problem on mercedes benz vehicles of that era. I hope I have been helpful

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 GMC Sierra engine misfire


DOES THIS VEHICLE USE COIL PACKS? MOST LIKELY (3.)....1 THAT FEEDS CYLINDERS 1&5 ....1 FOR 2&3 AND 1 FOR 4 AND 6......OR SOMETHING SIMILAR TO THAT. CHECK FOR A BAD COIL THAT FEEDS 4 & 6 TRACE PLUG WIRES TO INSURE THAT SAID COIL FEEDS #'S 4 & 6

Dec 20, 2013 | GMC Sierra 1500 Cars & Trucks

2 Answers

Misfiring code po1399 cylinder 3 and 4


On most Honda's when you get a misfire happening across the whole engine like that there are a few likely issues. the ignition coil if it's a single coil style or the connector at the distributor. They also have some issues with EGR's and plugged ports which can mess with the fuel trim numbers. It's important to check the fuel pressure and if possible a timing offset spec from the scanner whenever you're dealing with misfires on any vehicles Honda or not and determine correct pressure and flow whenever possible.


Hope this helps.

Aug 02, 2012 | Acura Cars & Trucks

1 Answer

I had two spark plug wires come off the coil,need the firing order on the motor and coil,It's a 3.9V6


STANDING FRONT OF VECHICLE CYLINDERS FACING YOU ARE 4 5 6 AND BACK CYLINDERS IS 1 2 3 NOW ON PIECE PAPER LOOKING AT IGNITION COIL PACK FACING YOU WRITE BACK NUMBERS 123 AND UNDER THAT NUMBER 1 2 3 WRITE FRONT NUMBERS 5 6 4 THATS YOUR COIL PACK PLUG WIRES LOCATION. LIKE I SAY 5 6 4 IS PLUGS WIRES LOCATION FACING YOU AND BACK NUMBERS 1 2 3 PLUG WIRES LOCATION ON COIL PACK. FIRING ORDER IS 1 4 2 5 3 6

Apr 04, 2011 | 2004 Ford Freestar

2 Answers

What is the plug wire diagram for a 2000 chevy lumina?


2000 Chevrolet Lumina 3.1 liter V-6 VIN "J"

zjlimited_276.gif


Hope helps.

Mar 29, 2011 | Chevrolet Lumina Cars & Trucks

2 Answers

2002 ford escape 3.0L DTC P0305and P0306 what would you ck


P0305 - Cylinder 5 Misfire Detected
P0306 - Cylinder 6 Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, The Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

When is the code detected?
- Engine Cylinder #5 and #6 is Misfiring.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation

Possible Causes:
- Improper spark plug at cylinder #5 and #6
- Insufficient compression at cylinder #5 and #6
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5 and #6
- Fuel injector #5 and #6 may be faulty
- Intake air leak at cyli

Possible Solution:
- Perform Injector Service
- Replaced Spark Plug #5 and #6
- Replaced Injector #5 and #6
- Replaced Ignition Coil #5 and #6

Hope helps.

Jan 02, 2011 | Ford Escape Cars & Trucks

2 Answers

Misfiring. Stopped at AutoZone and computer said #6 cylinder misfiring. Do I just need to change the spark plug or get a new coil pack? Also, which plug is number 6


number 6 plug depends on what engine you have 6 cylinder or an 8 cylinder you need to be careful with that code it could be a plug , a plug wire , a coil pack . i had an issue with that code and it was the crankshaft sensor 38 dollars from an autoparts store dealer wanted 170.00 ! crank sensors have an adjustment on them a few thousands of an inch and yes it makes a difference ! hold it down while you tighten the bolt . hope this helps

Nov 26, 2010 | 2005 Jeep Grand Cherokee

1 Answer

Lexus 2002 RX300 - What is it when the Trac Off, VSC & Check Engine lights are on and the DTC code says cylynder 1 and 6 misfire


You could have a bad coil pack or a bad fuel injector. swap out the coil packs from the misfiring cylinders and put them in the cylinders that are known to be firing correctly to narrow it down to determine if it is the coil pack first. When is the last time you changed the spark plugs? Pull them out of the misfiring cylinders to check the condition of the plugs.

May 25, 2010 | 2002 Lexus RX 300

1 Answer

1999 grand prix gt 3.8v 6 error codes 300 and 302


The PO300 code is random/multiple cylinder misfire detected. Sinsc you have the code PO302, that means that cylinder 2 is the one misfiring, usually a bad coil pack, or spark plug.

May 12, 2010 | 1999 Pontiac Grand Prix

1 Answer

I have a 2002 TrailBlazer with the straight 6,diognostic check said #3 cylinder was dead or misfiring, also map sensor showed up. #3 cylinder was misfiring, so to test the coil pack I swapped #3 coil pack...


did you replace only one spark plug? that can cause issues because of differences in resistances between cylinders. also, did the map code stay off after replacing
?

Feb 28, 2010 | 2002 Chevrolet TrailBlazer

3 Answers

Misfire code#306


cylinder #6 is misfiring check plug(if gap incorrect can cause misfire, fouled etc) , coil on plug (or Wires) poss spark plug coil pack (check for cracks and heat damage in insulation of pack)

Oct 20, 2009 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
2006 Mercedes-Benz CLK 500 Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...