Question about 2006 Peugeot 604

2 Answers

Peugeot Partner Van 51 Plate

Hi, my husband has recently purchased a Peugeot Partner Van and has difficulty starting first thing in the morning. Once started it starts everytime after. Battery is fine. Any ideas as to what could be the problem please??

Many thanks

Caroline

Posted by on

  • 2 more comments 
  • caroline11 Jan 03, 2009

    Hi, yes it is a diesel 1900cc

  • caroline11 Jan 07, 2009

    Many thanks for advice, all sorted now thank you...

  • Anonymous Feb 07, 2009

    My partner van is an X reg and turns and turns over in the mornings and takes 15 to 20 turns before it starts, after that it starts on the button every time. 1898cc Diesel. Please help

  • Kathleen Brown
    Kathleen Brown May 11, 2010

    HI,IS IT THE DIESEL 19OOcc?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 63 Answers

HI,AS IT IS HARD TO START THESE EXTRA COLD MORNINGS WE ARE GETTING,TRY A SET OF GLOW PLUGS, YOU CAN SEE THEM ACROSS THE FRONT OF THE CYLINDER HEAD,WITH A WIRE JOINING THEM UP,YOU WILL NEED A 8mm SCOKET , FOR THE WIRE, AND A DEEP 12mm ONE FOR THE PLUGS,UNSCREW TO THE LEFT,AND PUT A BIT OF GREASE ON THE THREAD OF THE NEW ONES AS THEY CROSS TREAD EASY,ABOUT 17POUNDS FOR A SET,THANKS.

Posted on Jan 04, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi change the preheaters

Posted on Feb 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Ford Econoline Problem Starting


It may not have anything to do with the tank switch. It sounds like the check valve in the pump has failed. The valve prevents fuel pressure from draining back into the tank.

Feb 09, 2014 | Cars & Trucks

1 Answer

5.3L dont want to start when cold but once its warm it starts everytime


Have you checked the fuel pressure regulator to see if its leaking?

Jan 26, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

Hi i have a 2004 partner van and the past couple of mornings it has been takeing longer to start, once started a puff of white smoke come's outer the exhaust then it runs fine. any ideas on the cause of...


Usually a little smoke in the morning is OK. Something you need to watch is the antifreeze/coolant in the radiator and or resevoir. if it constantly is getting low, you may have a blown head gasket.
This would account for the longer starts.
Randy

Nov 10, 2010 | 2005 Peugeot 405

2 Answers

Peugeot partner wopnt start replaced glow plug


what voltage u getting ?. did it just stop and then not restart. if its getting fuel and glow plugs are working the next two items id look at is the cam shaft and crank shaft position sencors. also make sure ur battery is in good condition, so starter motor is turning fast enough to build up the correct pressure on the rail.

Dec 12, 2009 | 2005 Peugeot 405

3 Answers

Peugeot partner wont start first thing once


i presume its a diesel

i reckon its the glow plugs get them checked i am sure a new set will cure your problem

Nov 05, 2009 | 2006 Peugeot 604

1 Answer

My heating is not working nothing wrong with termostat


low water clogged heater matrix or head gasket, take rad cap off, start engine, if bubbly then head or gasket, if all fine you need a matrix, this is very common to leak or clog, things like rad weld blocks them in months to come.

Apr 18, 2009 | 2006 Peugeot 604

1 Answer

Peugeot Partner Fuel Pump Problem.


If that connection is leaking, then that is more than likely the problem. If fuel is leaking out, then air will leak in. When the van is left overnight, the fuel will run back down the fuel line to the tank, leaving air in the pipe. The fuel system must be completely air tight. Try slapping some grease around the connection and see if it starts in the morning. if it does then replace the connector and you have fixed the problem.

TL

Jan 25, 2009 | 2005 Peugeot 405

1 Answer

Heavy noise from belt area


ck for bad bearings in a pulley or tensioner/

Dec 26, 2008 | Peugeot Esperante Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

1,458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

mike hayward

Level 2 Expert

279 Answers

Wahs Team

Level 2 Expert

215 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...