Question about 2007 Dodge Sprinter
Sprinter Front Brake pads change out
Posted on Aug 22, 2016
In order to get you the best answer we need more information, such as which part of the brake system you're replacing. Any information such as front or rear, pads or drums, would be helpful. More information of auto diagnostic tool at http://www.obd2express.co.uk
Posted on Oct 29, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.
Posted on Jun 02, 2009
do you do a lot of hills work?if so use the gears ,ifdown hill not the brakes if it is auto then slip it down i gear . make sure your rear brakes are adjusted regularly,but for the main part i would think it is the driver that is the problem,you may get an occasional faulty rotor but not three sets, over heating is the cause of your problem.dont missunderstand me chrysler brakes arent anything special but they arenot that bad , slow down
Posted on Sep 29, 2009
replacing brake pads is pretty simple but because the results of not doing it correctly is pretty severe (can you say accident) I recomend you get a Haynes manual for your vehicle. Generally they can be purchased for approximately $20 at autozone. The basics for replacing brake pads (as opposed to brake shoes) is to losen the brake caliper so it can be moved up off the brake rotor. Then the old pads pop out. Next the brake caliper piston is pushed back into the caliper and the new pads fit in. Now the caliper is placed back over the brake rotor. Again, get the manual.
Posted on Feb 11, 2010
Tips for a great answer:
May 15, 2012 | 2007 Dodge Ram 1500 Quad Cab Sport
May 15, 2012 | Dodge Cars & Trucks
Dec 30, 2011 | 2007 Dodge Sprinter
Oct 22, 2010 | 2006 Dodge Sprinter
Aug 31, 2010 | 2000 Dodge Stratus
Aug 07, 2010 | 2007 Dodge Nitro R/T New Cars
Feb 10, 2010 | 2006 Dodge Ram 3500 Truck
Jan 27, 2010 | 2007 Dodge Charger SRT8 Sedan
Dec 04, 2009 | Dodge Sprinter
Oct 10, 2009 | 2000 Dodge Stratus
315 people viewed this question
Usually answered in minutes!