Question about 1989 Toyota Camry
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be the lower control are bushing, it apparently is an issue with that model year. Big bucks (850 CDN$) to fix as the 'whole' front end needs to be partially dropped and both should be done at the same time. A mechanic should be able to see if that is a problem while the car is on the hoist. The mechanic should be able to point to the area or point where the contact is being made. Mine lasted till 100,000 km, I heard it on the second hand test drive ( at 90,00 km) and asked a buddy ( a Toyota Master Mechanic) about it and he made me aware of it; i bought the car anyways.
Posted on Mar 23, 2009
SOURCE: 1988 toyota hj75 land cruiser
Repelce fuel filter, check is there any fuel leak,
also check heater plugs,
if all that ok check injectors and injection fuel.
check how is engine compresion.
Posted on Oct 07, 2008
First step, see what is missing when it wont start, fuel, or spark. Is it carburated? or fuel injected. (22re should be injected.)
Posted on Aug 03, 2009
there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks
Posted on Aug 11, 2009
The heater may not work because of a bad thermostat, low coolant, or a bad sensor at the engine. It can also be a bad resistor valve under the dash. The resistor valve is connected to a wire plug on the blower motor under the dashboard. It needs to be replaced. Th AC may need to be refilled with refrigerant or the compressor may be bad.
Posted on Nov 18, 2009
Tips for a great answer:
Mar 06, 2016 | Toyota Cars & Trucks
Nov 29, 2012 | 1995 Toyota Camry
Jan 24, 2011 | 1988 Toyota Camry
Oct 19, 2010 | 1988 Toyota Camry
Apr 24, 2010 | 1988 Toyota Supra
Mar 23, 2010 | 1993 Toyota Camry V6
Mar 11, 2010 | 1988 Toyota Camry
Jan 19, 2009 | 1988 Toyota Camry
Jan 15, 2017 | 1989 Toyota Camry
78 people viewed this question
Usually answered in minutes!