Question about 2008 Dodge Grand Caravan

Open Question

2008 grand caravan rear caliper torque specs - 2008 Dodge Grand Caravan

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 49 Answers

SOURCE: 2005 Grand Caravan Brake Job

Better late than never, right?
According to Haynes 30013: "Dodge Carvan, Chrysler Voyager & Town and Country, 2003 through 2006" Repair Manual:
Caliper Guide Pins or Guide Pin Bolts - 26 Ft-lbs

Posted on Jan 24, 2009

morse008
  • 1111 Answers

SOURCE: reset piston on rear disc brakes 2008 Grand Caravan

they should screw in not compress

Posted on Aug 24, 2009

Testimonial: "Thanks--very helpful---fast response!"

SOURCE: torque specs for the main rear seal on a 2000 dodge caravan???

i am the owner of Alexander's Garage yu may contact me at 717-242-1749.

Posted on Feb 22, 2010

Molson02536
  • 3854 Answers

SOURCE: compressing the rear disc brake caliper on 2008 grand caravan

The rear calipers on these models require a special tool that compresses and turns the piston in at the same time -- most parts stores carry this tool.

It is called a caliper piston press -- and it installs where the pads would go and acts like a c-clamp,when turning handle it will turn the caliper piston backinto the caliper as it compresses it.
Anytime the brake rotor or brake pads are being replaced, the rear caliper piston must be seated (bottomed) to compensate for the new brake rotor or lining. Because the Parking Brake self-adjuster mechanism is attached to the piston, a special seating method is required. The only acceptable method is by rotating the piston back into the bore using Retractor,MILLER Special Tool 8807, . Any other seating method will damage the self-adjuster mechanism.
Good luck and hope this helps.

Posted on Mar 07, 2010

  • 509 Answers

SOURCE: Do I have bleed the brake line when you replace

If you disconnected any brake lines then yes you have to bleed them.

Posted on Nov 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front axle 2008 dodge caravan torque spec


torque the axle nut to 105 ft pounds

May 29, 2014 | 2008 Dodge Grand Caravan

2 Answers

Trying to change the rear brakes on a 2008 caravan but can not get the e brake cable off so I can remove the caliper


The brake cable does not need to be removed to take off the caliper. The only things that need to be taken out are the two bolts that hold the caliper to its mounting bracket.

Hope this helps!

Jun 15, 2011 | 2008 Dodge Grand Caravan

1 Answer

How do you get the rear calipers back on a 2008 dodge grand caravan


you screw them in as you push them in ,simple or buy a special tool for the job

Apr 10, 2011 | 2008 Dodge Grand Caravan

1 Answer

Caliper on the rear disc brake will not go in so I can put the new one on how do you release the caliper to go in.


you need a rear caliper piston tool. You can buy one or Auto zone will lend you one if you buy the pads from them. They have a universal tool that will work with several different makes and models. It worked fine on my 2008 Dodge Caravan. You just use your racket and turn the tool to open compress the caliper enough to get the new shoes in. Piece of cake.

Aug 12, 2010 | 2008 Dodge Grand Caravan

1 Answer

Need torque specs for brake caliper bracket bolts.2000 grand prix


Hello and welcome. here is the torque specs for the bolts.

Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
caliper brake bracket bolts torque to 180 n.m or 133 ft.lbs

Jul 26, 2010 | 2000 Pontiac Grand Prix

1 Answer

DESCRIBE CHANGE OUT OF PADS AND ROTORS FOR A 2007 DODGE GRAND CARAVAN 2007


first raise and safely support vehicle remove the wheels remove the spring from the caliper(pry under the spring where it goes into the caliper be careful don't let it fly) locate the two torx bolts holding the caliper to the bracket remove them using the proper size bit remove the caliper by prying it away from the bracket remove the pads by pulling strait out remove the two bolts holding the bracket to the steering knukle(very tight) remove the rotor install is the reverse of removal torque specs are as follows wheels 80-100ftlbs caliper bolts 40ftlbs bracket bolts 90 ftlbs



Sep 24, 2009 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

2005 Grand Caravan Brake Job


Better late than never, right?
According to Haynes 30013: "Dodge Carvan, Chrysler Voyager & Town and Country, 2003 through 2006" Repair Manual:
Caliper Guide Pins or Guide Pin Bolts - 26 Ft-lbs

Nov 20, 2008 | 2005 Dodge Caravan

Not finding what you are looking for?
2008 Dodge Grand Caravan Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...