Question about Cars & Trucks
Does not do this all the time and definitely won't for the Honda garage. Notived that does it often when nose of car is downward on a hill and motor is idling.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: my motor making a ticking noise
make sure the battery is fully charged, and then if so, you have a starter that has went out.. you will need to replace it...
also, make sure the battery cables are tight and clean
Posted on Nov 25, 2008
Rule of thumb this is a timeing belt and it should be changed every 75,000 mile as a general practice. I hope this helps, dont forget to rate my answer, thanks
Posted on Feb 20, 2009
An IAC (idle air control) motor is designed to adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The car computer or ECM (electronic control module) receives information from various sensors and will output signals to adjust the IAC motor in or out to adjust engine idle speed by controlling engine idle air.
An IAC motor is highly susceptible to carbon and coking build up; if an IAC goes too long without cleaning it can cause stalling and poor idle quality. Some cars are designed with a large vacuum transfer hose that connects the intake manifold to the IAC (idle air control) motor. If a broken or dilapidated these vacuum lines can cause the engine to lose vacuum which will allow the engine to run rough and die.
Inspect all engine and accessory vacuum lines to look for missing, torn or dilapidated lines and replace as needed. To check the IAC motor remove the unit, with the wires connected turn the key to the "on" position without starting the engine, the IAC should move in or out.
If the IAC motor does nothing it has probably failed, replace it with a new unit and recheck system. Note: while the IAC motor is removed clean (use aerosol carburetor cleaner) the passages the IAC uses to control idle air speed.
Good luck and hope this helps
Posted on May 08, 2009
inside glove box there should be a sticker with the radio serial number and code. if that has been removed then you could try the honda owners site. you'll need the vin # and some other info
I was able to get the code recently for my 2010 CR-V
Posted on Jan 13, 2010
Tips for a great answer:
Oct 06, 2016 | 2013 Honda CR-V
Jun 06, 2016 | 2012 Honda CR-V
Dec 19, 2014 | 2002 Honda CR-V
Nov 05, 2013 | Honda CRV Cars & Trucks
Oct 23, 2012 | Honda CRV Cars & Trucks
May 20, 2012 | Cars & Trucks
Mar 12, 2010 | 2003 Honda CR-V
Nov 18, 2009 | 2007 Honda CR-V
Jun 14, 2009 | 2002 Honda CR-V
Mar 30, 2009 | 2002 Honda CR-V
81 people viewed this question
Usually answered in minutes!