Question about 2009 Ford Focus SE

Open Question

Ford focus 2009 fuel tank pressure sensor - 2009 Ford Focus SE

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2001 ford focus fuel pump

Yes you do. Be careful of the plastic fuel supply line when you reinstall the assembly. The hose can kink, and you will not have fuel pressure.

Posted on Mar 25, 2009

  • 139 Answers

SOURCE: 2009 Ford Escape: After refueling

if you go back to the dealer they should be abble to
help you . need to be recalibrated or they wiil replace
the unit

Posted on Apr 12, 2009

  • 18 Answers

SOURCE: How to install fuel sensor?without breaking anything else

Well id suggest firstly draining the tank of as much fuel as possible, for safety and weight. secondly the tank doesnt have to be fully dropped there is enough room to be able to replace the sensor therefor you can leave the filler neck and tubes connected. undo the tank supports on one side and gain access that way.

Posted on Jun 04, 2009

  • 30 Answers

SOURCE: possible vaccum in fuel tank, EVAP system.


Posted on Oct 27, 2009

  • 870 Answers

SOURCE: i have a 2009 ford

It should go away after an hour or so from the time you get the tire fixed.

Posted on Dec 20, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuel Tank Pressure Sensor 2014 ford focus location

Hopefully, the top arrow is the fuel tank pressure sensor, in the gas tank. It has a quick connect fitting, my info says to separate tabs then press on the retainer to separate. You may have to safely raise and support the vehicle. Anytime your working under a vehicle, there are safety issues, safety is your responsibility.
fuel tank pressure sensor-35kaynemhjuycqusgxz0oqk2-5-0.jpg

Sep 14, 2017 | Ford Cars & Trucks

1 Answer

2009 accord coupe 4 cyl fuel tank pressure sensor location & does tank have to be dropped?

Yes the tank must be dropped, but not entirely removed, the sensor is on the top of the tank.

Sep 05, 2016 | Honda Accord Cars & Trucks

1 Answer

Where is the FPT sensor located on 2009 Cadallic DTS


Mar 04, 2015 | 2009 Cadillac DTS

1 Answer

What to do with code P0451

fuel cap, evap canister and its related sensors, vacuum leaks

Dec 13, 2013 | Ford Cars & Trucks

1 Answer

Where is fuel rail pressure sensor located 2005 ford focus

Before you change your fuel pump or fuel rail pressure or the sensors there are five things you will have to check first....first the inertia switch second if you have had the fuel filter change third the fuses fourth the sensors if they are bad or have been wet and the fifth the fuel pump pressure...

Dec 10, 2013 | 2005 Ford Focus

1 Answer

Ive got gas in the cranck case on a 2009 ford focus 2.0 crank case is over full and very thin oil runs fine. whats going on?

Usually a leaking fuel injector or fuel pressure regulator.
The injector can leak fuel into the cylinder after you turn the engine off.

Apr 08, 2013 | 2009 Ford Focus

1 Answer

2001 ford focus with zetec engine still sputters and stalls when warmed up after replacing fuel pump, fuel filter, and fuel tank pressure sensor

i have ford focus ghia 2.0 2002 model and i have problem with the fuel pump sometimes it works sometimes it doesn't.. when i fill the tank petrol pores out, the pipe next to the filter also comes out, how do i fix the problem?

Dec 08, 2012 | 2001 Ford Focus

1 Answer

Diagnostic code p2195 and p1131 for ford focus 2007?

P1131-- Lack of HO2S-11 Switch ,Sensor Indicates lean

P2195-Lack of HO2S-11 Switch,Sensor Indicates Lean

If you have one or two front upstream sensors & have 100,000 miles
on them, replace them as preventative maintenance

The codes are for an Oxygen Sensor closest to the engine,
on the side #1 Cylinder is on

Sensor Codes could be caused buy a leaking injector,
low fuel pressure,running out of fuel,EGR problem,Exhaust
leaks before sensor or converter,any vacuum leak,& other issues

Remove the spark plugs to see if they are fouled from fuel

You can not fix an injector with any fuel tank additive
They have to be removed & mailed away to be cleaned
if they stick open,you could install one if it leaks & is the
only issue.

Oct 01, 2012 | 2007 Ford Focus 1.8

1 Answer

How do you refuel diesel in ford focus zetec, 2009

is that what is the recommended fuel for it? it should go into the fuel tank or there might be a switch u have to flip or push

Mar 23, 2011 | 2009 Ford Focus

Not finding what you are looking for?
2009 Ford Focus SE Logo

Related Topics:

806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides