Took jeep to a mechanic and he said my neutral safety switch was bad. i want to know how to replace it?
You can ask the mechanic to replace it , do you want to replace it by yourself???
_____________
autocom cdp latest software
SOURCE: 1994 Jeep Cherokee will not start or even crank
I had the same problem with my 94 jeep and i ended up finding out what was causing the problem was the starter relay in the fuse box under hood, i believe its the second or third relay. Try turning the key to the start position and leave it there and poop open ur hood and manuelly start the relay
SOURCE: Where is Neutral safty sensor switch located on Grand Cherokee
OK then the switch is part of the gear selector switch on the side of the trans where the shift linkage hooks up. here is a picture and part number.
ACDELCO Part # C2241 $233.89
SOURCE: 1998 Jeep Cherokee Sport. The neutral safety
The nutral safty swiths is to ensure the vehicle doens't crank in any gear but park. Just make sure it is not out of adjustment
SOURCE: 2004 Jeep Grand Chrokee Neutral Safety Switch Location
The switch is on the transmission..It is usually a dealer item but you can get one from Rockauto.com for about 1/4 of what the dealers charge.
SOURCE: where is neutral safety switch 95 jeep cherokee
Your switch is on the passenger side of the transmission opposite where the shift linkage goes in on the drivers side.It takes a bit of careful prying and wiggling and some solvent to get most to come off. after removing the hardware that holds it on. The switch goes for about $200 but can be taken apart and cleaned...unless the contacts are really burned it will generally work after that. make sure that you keep it flat when taking it apart because stuff inside can fall out easily. Put dielectric grease in there before closing it up.Can't help with schematic...the ones I have I wouldn't wish on anyone. (terrible)
147 views
Usually answered in minutes!
×