Question about 1998 Ford F150 Regular Cab

Open Question

Changing a heater core in 2009 ford f 150 - 1998 Ford F150 Regular Cab

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: heater core replacement of 1995

If your truck has air conditioning you drain the radiator and disconnect the heater hoses on the right of the engine at the firewall.get in the cab on the passenger side and remove the grove box for better access than remove the seven screws that holds the cover on remove the vacuum source but leave the vacuum harness attached to the cover and remove the cover than remove the heater core from its chanber.Now all you have to do is put every thing back in place.
Steve

Posted on Oct 08, 2008

Ad
  • 16 Answers

SOURCE: Heater core 1990 Ford F-150

I believe this is the easiest heater core ever invented. If it is like the 1986 model. I believe it is. You take out the glove box door. The heater core is right there under a cover in the duct work.

Posted on Oct 13, 2008

LEFTY64
  • 69 Answers

SOURCE: blown heater core in a 1977 ford f-150 pick-up

1976-79 Without Air Conditioning

  1. Disconnect the temperature and function control Bowden cables from the heater housing. This must be done to prevent damage to the cables.
  2. Disconnect the wires from the blower resistor.
  3. Remove five screws attaching the air inlet (vent) duct to the heater housing.
  4. Disconnect the blower wires.
  5. Drain the radiator and remove the heater hoses from the heater core.
  6. Remove three heater stud retaining nuts and remove heater.
  7. Remove gasket between the heater hose ends and the dash panel at core tubes.
  8. Remove heater core cover and gasket (four screws).
  9. Pull heater core and lower support from heater.

To install:
  1. Install foam gaskets on heater core and install in heater assembly.
  2. Install the core seal and cover plate.
  3. Position heater assembly in vehicle and install three stud retaining nuts.
  4. Connect heater hoses to heater core and fill radiator.
  5. Connect blower motor wires.
  6. Place defroster nozzle on heater so that the defroster and heater openings are in the up position, and there is no air leak around the seal.
  7. Install air inlet (vent) duct to heater. Push duct firmly against seal on side cowl and tighten five attaching screws.
  8. Connect wires to blower motor resistor.
  9. Connect temperature and function control cables to heater, and adjust the cables.
  10. Reinstall gasket between the heater hose ends and the dash panel at core ends.
  11. Fill Cooling System.

  12. Hope this helps you! Please remember to rate my solution.

    Lefty64

Posted on Apr 09, 2009

harley9701ha
  • 424 Answers

SOURCE: how do i change heater core on 1993 f-150

Remove the glove box. Disconnect the heater core from the heater hoses. Remove the cover behind the glove box held on by 8mm screws. Disconnect the temperature cable. Remove heater core. Good luck.

Posted on Jul 10, 2009

SOURCE: How to reset oil change light on a 2009 Ford F 150

it will tell you in your glove box service book

Posted on Dec 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flush heater core on 2009 ford ranger


if your just doing the heater core you can clamp off the heater hoses to the core, disconnect them from the heater core and run water through it both ways. if its real bad connect spare hoses to the heater core spigots and pour CLR into the core until it is full(coming out other hose) block off hose so the core is filled and let sit. then flush out again until water runs clear. if this won`t clear it then it will have to be replaced.

Mar 06, 2015 | 2009 Ford Ranger Regular

1 Answer

F-150 will not heat on heater or defrost. Short time ago replaced heater core. Recently changed thermostat and flushed entire coolant system. Any ideas?????


is the fan blowing if yes unhook the heat core to see if water comes out put a hose up to it to see if water comes out if so it maybe a heater value to

Feb 12, 2010 | 1992 Ford F150 SuperCab

1 Answer

Heater core for a Ford 2000 F-150 5.4 4x4 had been


There is a Haynes Manual available for your vehicle @ most large Auto Parts stores. It covers how to do this. $25.00 for book.

Feb 03, 2010 | 2000 Ford F150 Flareside SuperCab

2 Answers

89 Ford F-150, 4x4, 4 spd Manual,4.9 L 6 cyl, Need to have instructions on location and R & R on the heater core. Thanks.


the heater core is behind the glove box, remove the glove box open excess panel and you will see the core. remove heater hoses and pull core out installation is reverse order. berrydalewolf

Oct 29, 2009 | 1989 Ford F 150

2 Answers

2003 f150 heater core is leaking . I need amanual so I CAN MAKE SURE I'M TAKING THE DASH APART THE RIGHT WAY.


Go to Auto Zone or O'Rieley's auto parts and purchase the Haynes manual for your year, make and model. Haynes usually has a better section on the dash and heater disassembly process.

Sep 23, 2009 | 2004 Ford F150

1 Answer

How do i change heater core on 1993 f-150


Remove the glove box. Disconnect the heater core from the heater hoses. Remove the cover behind the glove box held on by 8mm screws. Disconnect the temperature cable. Remove heater core. Good luck.

Jul 09, 2009 | 1993 Ford F150 SuperCab

1 Answer

Leaking heater core


how do i replace a heater core in a 1992 ford f-150

Dec 19, 2008 | 1989 Oldsmobile Cutlass Calais 4 Door

1 Answer

Heater core 1990 Ford F-150


I believe this is the easiest heater core ever invented. If it is like the 1986 model. I believe it is. You take out the glove box door. The heater core is right there under a cover in the duct work.

Oct 11, 2008 | 1990 Ford F150

Not finding what you are looking for?
1998 Ford F150 Regular Cab Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...