Question about Cars & Trucks

Open Question

Onity ht24 lock has bad clutch and door is closed

How do I get this door open if the clutch is bad?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ipodfreek
  • 64 Answers

SOURCE: 2002 taurus passenger door lock

Mine did this. I went around to each door and sprayed a liberal amount of WD-40 in the latch, then open and closed each door about five times. It hasn't done it since. I think the switch inside was not moving freely.


Posted on Jan 16, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Onuity HT24.Lock needs updated and master wont work.Using PP the PP I attempted to perform update but the the lock doesn't recognize the PP is connected. Upon inspection I find that ground is broken where...


I suggest you try one of those instant download manuals. My nephew bought one for me
when my car broke and we could fix it all by ourselves with the manual at www.reliable-store.com . This website is very good for this.
?Try it.

Mar 11, 2018 | Cars & Trucks

1 Answer

Does the 2009 CR-V have a door jamb sensor for the tailgate? Tailgate light is on, on dash. Doors won't lock with FOB or while moving. Tailgate closes, locks and unlocks, it just thinks it's open.


Sounds like a bad switch on the tailgate. Open your tailgate and look for a switch. When you find it...press it in completely and see if the sensor light goes off. If so, replace it.

Semper Fi,
Z

Jan 29, 2018 | Honda Cars & Trucks

1 Answer

I have onity lock after using guest key card i am getting green light but handle is not opening door


Listen if you hear a click sound when you get the green light. Try to turn the handle up. If you hear a click, and you can open the door when you turn the handle up, you have a bad clutch kit. If you do not hear a click, then your circuit board needs replaced.

Call if you have any more questions or need to order the parts.

Thanks,

Ken Croston Jr.

407-814-4974

Feb 28, 2014 | Cars & Trucks

1 Answer

Drivers door will not open with key or battery hand piece,,other doors okay with both. 2002 crv


-If the problem is that keyless remote does unlock or lock door, but the lock lever still move when pulling up and down by hand. Door still open and close with both inner and outer, then might the driver door lock actuator is bad. The actuator lock and unlock the door for you when using the keyless remote or door lock/unlock switch.

-if you try using the key to unlock door and the key doesn't turn the door cylinder, then you have a bad door lock cylinder.

-if the lock lever doesn't move up or down and you can't open door using any handle, then you got a bad lock latch assembly.

I'm not sure what the issue is but hope this helps you.

Jan 18, 2011 | 2002 Honda CR-V

1 Answer

2003 toyota camry how do you reset wireless entry remote


if remote is good here are the factory instructions to program it, if this doesn't work u may have a bad remote or receiver in car.

1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Sep 09, 2009 | 2002 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14512 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...