Question about 2006 Nissan Altima

Open Question

My 2006 altima nissan signal light do not come on inside the car

The signal light works on the outside but does not show on the inside

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jschoon77
  • 55 Answers

SOURCE: DOOR WON'T OPEN FROM INSIDE OF NISSAN ALTIMA 2002 ON DRIVER'S SIDE

There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If the retainer is not holding the cable sheath correctly, the entire cable moves when the handle is pulled and does not release the door latch.

Remove the door panel and inspect this cable. You will see 2 cables (one is for the door lock). If the plastic is broken, you will need a new interior handle assembly.

Hope this is helpful!!



Nissan Scope Technician- 10+ years experience in Nissan dealership

Posted on Nov 11, 2008

Ad
rmeyer
  • 80 Answers

SOURCE: 2005 nissan altima won't start, clicking noise is heard

It sounds like your battery is dead. You may be able to fix this with a jump start if you left your lights on over night. If a good jump does not work it may be your starter. but you should start with the simple and cheap solution first. Try having someone jump start your car.

Posted on Jan 10, 2009

drstrawn
  • 48 Answers

SOURCE: Outside temperature display on rear view mirror

Here are the instructions to reset flashing airbag light, the instructions are for an Armada but I believe it will work on all Nissan models of this period. It wont hurt to give it a try. If that doesn't work you may have a problem that should be looked at by your local Dealer.

>>>
1. Turn the key from off to on.

2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly.

3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)

4. Repeat steps 1-3 two more times until you have done the cycle three times.

5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.

6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.

www.nissanhelpforums.com

Posted on Feb 28, 2009

  • 139 Answers

SOURCE: dashboard warning brake light stays on continuosly nissan altima

Try this, Since you are applying the hand brake. Manually pull up on the emergency pedal and see if the light goes out. If this does work then you could have one of several problems. but, I am thinking that you might be able to adjust the brake tensioner if this car has one.

Posted on Jul 05, 2009

  • 1986 Answers

SOURCE: My SES light wont turn off in my 2006 Nissan

If the light was flashing when it came on, then it means your engine is misfiring.

A solid light can mean anything from a loose/faulty gas cap to a transmission issue.

This light comes on when the computer detects a fault of some sort in its diagnostic tests. If it keeps detecting this issue, the light will remain on. If the light turns off, then it has detected that the issue may no longer be present.

In order to find out what the exact reason was for your light, You need to have your car computer scanned to retrieve the code that the computer would have stored when the light triggered. Most garages will do this free of charge. The code will tell you what may have caused the light to initially turn on.

Posted on Nov 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to check why my car alarm in 2006 nissan altima is not working


If it aftermarket(bunch of wires and modules under the dash on the drivers side) remove it. If it is still factory it takes a scanner.

Dec 03, 2015 | Nissan Cars & Trucks

2 Answers

My signal are working well outside but dose not indicate on the datch board car nissan altima 2003


There is a Relay usually in the interior Fuse Panel under the Dash for the Turn signal that's where the clicking noise comes from also when your turn signals are on, I suspect you have a bad Relay or even a Fuse. Its unlikely the bulbs simultaneously went out in the Dash. So check your fuses and the Turn Signal Relay.

Jun 17, 2015 | 2003 Nissan Altima

1 Answer

I have a 2006 Nissan Altima. It has been having a hard time rolling over when starting. The digital indicator light by the mileage shows an "A" with a box around it. I checked for this indicator li


hey ashley. the "A" symbol is just a mileage counter. i have an altima aswell and we can cycle thru A, B, C for mileage counters, km til empty for gas, the time, temperature outside, and total driving time. cycle tbru by hitting the mode button on the left of the steering wheel buttons, right beside the seek for songs buttons

Apr 11, 2013 | 2006 Nissan Altima

2 Answers

2006 Nissan Altima LH driver side headlamp will not work. Replaced bulb & still will not light. Fuse box diagram insn't marked for headlamps. what could be the problem?


you will find another fuse block under hood near windshield washer fill neck.remove the cover and it will show the location of headlamp fuses.most likely is a blown fuse.

Feb 20, 2011 | 2006 Nissan Altima

1 Answer

Need to change out back brake light on 2006 nissan


take interior cover behind tail light inside trunk off.the bulb the bulb twist locks in hole(twist counter clockwise to remove)repeat procedure to replace.

Mar 23, 2010 | 2006 Nissan Altima

1 Answer

2006 Altima service engine light on, code 725


Check the SPARK plug condition, and AIR gap.
Regards,DT

Aug 26, 2009 | Nissan Altima Cars & Trucks

1 Answer

1999 Nissan Altima GXE Turn signal problem


you have a busted bulb, your hazard may be working fine but the bulb is double contact so one part is working and the other is not. just check which bulb is busted.

Apr 20, 2009 | 1999 Nissan Altima

Not finding what you are looking for?
2006 Nissan Altima Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...