Question about Cars & Trucks
Here's a link to.I have a 85 nissan4x4.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?fromSearchPage=true&pageId=0900c1528018cf55&partName=Intake+Manifold&partId=0900c1528018cf55
Posted on Oct 28, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi El Faraon,
I believe that you're dealing with 12 mm bolts and nuts....THESE ARE NOT THE SPECS FOR YOUR ENGINE, but I believe that if you use them you'll be close....Tighten in three stages up to 22nm....choose the bolts from the centre of the manifold and circle outwards until you reach the last one.....It may be a good idea to draw an overhead or plan view of the unit, marking out the bolt positions.....Start at the centre and mark the sequence and follow that....What is important is starting at the centre, so that nothing becomes warped....
Hope this helps,
Posted on Sep 06, 2008
go to the auto shop and get a hanes manual for the year and make for your car it will give you step by step directions and pictures to go by
Posted on Dec 21, 2008
PCV DIRTY OR NO GOOD VENTILATION ON THE VALVE COVER
O THE GASKET OR FORM GASKET ON THE INTAKE IS WORN OUT
BUT U NEED TO SAID WHERE IS THE LEAK THE MANIFUL IS BIG
FRONT SIDE REAR WHERE REMEMBER WE TRY TO HELP BUT WE ARE NOT DAVID COPERFIELD
Posted on Oct 20, 2010
I'am sort of missing something here
Was the radiator blocked or replaced as a guess ?
The thermostat i understand
The heater core by pass i don't,what does that prove ?
The shop says - intake manifold hose.
A hose causing overheating,explain that one.
The finally question
What is your question? Did the repair shop
get lost and ask you for help?
Posted on Mar 31, 2011
If you have to remove the top half or plenum of the intake manifold, it is always recommended to replace the gaskets. I have squeaked by without doing it if the gaskets are in good condition.
Posted on Aug 25, 2012
Tips for a great answer:
Jul 12, 2016 | Nissan Tiida Cars & Trucks
Sep 23, 2015 | Cars & Trucks
Sep 08, 2014 | 1995 Nissan Pickup
Dec 19, 2010 | 1992 Nissan Pathfinder
Oct 20, 2010 | 1987 Nissan Pickup
Jul 20, 2010 | 1995 Nissan Sentra
Feb 09, 2010 | 1992 Nissan Pickup
Jul 02, 2009 | 1992 Ford F250
Jun 21, 2009 | 1997 Nissan Maxima
Dec 15, 2017 | Cars & Trucks
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: