Question about 1996 Ford Taurus

Open Question

2.3 ford ranger oil pressure sender location diagram

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75197 Answers

SOURCE: oil pressure sensing switch location

The oil switch is located on the passenger side of the truck in the back of the engine. Look for the transmission dipstick, then feel for it between the transmission dipstick and the engine block. It is hidden pretty well, but a socket wrench will fit to take it off. The new part uses a 1-1/16 socket, the old part for some reason was smaller, I think 13/16 inch. Hope that helps.

Posted on Nov 06, 2008

seans46
  • 161 Answers

SOURCE: location low pressure port a/c 2000 ford ranger 3.0

I am not sure I thought some of them were on the back of the compressor which makes it hard to see . but one thing for sure follow the low press line towards the evap and you will find it

Posted on Jun 09, 2009

  • 7353 Answers

SOURCE: 2001 ranger 4.0l oil pressure sender location? the

the sender should be near the filter., but if the needle is that far off, your problem is in the instrument cluster.

Posted on Oct 04, 2009

john631068
  • 172 Answers

SOURCE: where is the oil sender unit on a 1999 ford 5.0

should be right above the oil filter driver side of motor front ..sending unit looks like a bell shape with one wire going to it ....

Posted on Nov 16, 2009

Testimonial: "Very prompt expert response-really appreciated-much thanks"

ftw1952
  • 10319 Answers

SOURCE: I have a 2002 Ford Ranger Edge, with a 3.0L

near the oil filter area

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I locate 1995 Ford Ranger 2.L temperature gauge sensor ?


The water temp sender is 22 in the picture, close to the oil filter. One wire connector, wire color, red with a white tracer.
26299031-rvydx2ruimwltwzqkdfeckti-5-0.jpg

Oct 02, 2016 | Ford Ranger Cars & Trucks

1 Answer

Oil pressure gauge is not registering a reading. oil pressure is good. any suggestions on what the problem may be?


o.k. but the sender has a bimetal element inside it even if the connection looks good the sender inside can be damaged and not making contact thus no reading also I think you might have the wrong sender installed so here's the photo's to help you
25431847-mw15b40k2qagavg3tg52bcrc-4-0.jpg
2.3L with the gauge
25431847-mw15b40k2qagavg3tg52bcrc-4-2.jpg
2.3L with the light
25431847-mw15b40k2qagavg3tg52bcrc-4-5.jpg
2.9 with the gauge
25431847-mw15b40k2qagavg3tg52bcrc-4-9.jpg
2.9L and the 2.3L are the same for each engine with the light the gauge senders are different this could be the problem wrong sender installed and its not reading pressure because it can't? good luck stephen

Feb 15, 2015 | 1989 Ford Ranger

2 Answers

Where is coolant temp sensor located


Not sure of your engine size so please pick the appropriate diagram:


22070ae.gif

Coolant temperature and oil pressure senders-4.3L engines



b65ae41.gif

Coolant temperature and oil pressure senders-5.0L and 5.7L engines



c1bcdb8.gif

Coolant temperature and oil pressure senders-7.4L engines



dd2f3ba.gif

Coolant temperature and oil pressure senders-6.2L and 6.5L diesel engines

Sep 15, 2010 | 1994 GMC Sierra

2 Answers

Where is the oil pressure switch located on a 1987 ford ranger with a 2.9 L engine


2.9L and 4.0L engines-Left side front of the engine, below the cylinder head in the engine block.

Jul 02, 2010 | 1987 Ford Ranger

3 Answers

I have a 97 Ford Ranger with a 4.0 with 122,00


Check your oil pressure gauge sender first. It might be the pump but often they wear down gradually. It might also be the pressure relief valve spring. Most likely it is the oil pick-up pipe in the sump. Take the pan off and inspect for crud blocking it. If clear it will be very easy to check the pump. The pump vanes are driven directly so any free rotation would indicate a (rare) pump failure.

May 12, 2010 | 1997 Ford Ranger SuperCab

2 Answers

Location of oil sending unit? on a 1990 ford ranger with a 2.3l


Drivers side about 3" from the back about 2" from the oil pan. Will have a single black wire leading from it to the wire harness
Hope this helps
Please leave feedback Thanks

Dec 24, 2009 | 1990 Ford Ranger SuperCab

1 Answer

2001 ranger 4.0l oil pressure sender location? the oil gauge needle has somehow went past the high level and now sits below the low level pin.


the sender should be near the filter., but if the needle is that far off, your problem is in the instrument cluster.

Oct 04, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

Oil pressure slow to rise


you need to try a external gauge to check the pressure to see if your dash gauge is right

if the engine took 10 minutes to get oil pressure it would be dead by now i would replace the oil pressure sender unit first

Dec 30, 2008 | 2001 Ford Ranger Regular Cab

Not finding what you are looking for?
1996 Ford Taurus Logo

Related Topics:

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...