Question about 2005 Cadillac Escalade Ext

1 Answer

I changed the breaks and the abs and t/c lights came on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

First thing I would do is disconnect the battery and then reconnect it. It resets the computer when you changed the brakes the sensor probably went off. If that doesn't fix it then you may have damaged the sensor or the wiring to the sensor.

Posted on Oct 28, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS and handbrake light beeps while driving


ABS warns you about a problem in your ABS System starting from the fuse, or relay and the other light is not for the hand break ! it's warning you about your break PADS.
So change your break pads and check your ABS system functionality.

Mar 23, 2017 | Cars & Trucks

1 Answer

Hyundai trijet just had abs ring changed on passenger front now abs light stays on and hand break light stays on. Help.


If a wire was broken replacing the reluctor ring, this would be the ABS light. Not the brake light. Check the brake fluid, check the E brake pedal/handle. The rings do break, I just weld them back in place. If they are gone, it gets a new axle.

Sep 11, 2016 | 2005 Hyundai Trajet 2.0

1 Answer

Abs light comes on when i step on break pedal but i have full breaking power


ABS lights are usually triggered by a sensor, not a master cylinder.

Sep 15, 2014 | 1998 Ford Explorer

2 Answers

My ABS light came on in my 99 honda accord what does it mean?


Normally when your abs light comes on, that is referring to your breaks. This could be low break fluid, leak in break hose somewhere, or need breaks checked. Most cars now a days, have a sensor that is part of and hooked up to your breaks, and that will trigger your abs system (which is breaks) and let you know if your pads are low, or to the ware mark. So Here is what you first do, is check your break fluid and make sure that resavor is full, check under car to make sure there is no leaks, under car and inside each wheel area where breaks are, and then next step, is Les Swab can check your breaks for free and let you know if your pads are down to the ware mark. Let me know, Mike

Sep 14, 2011 | Honda Accord Cars & Trucks

1 Answer

My 2000 VW Beetle's Ac stopped working. It doesnt blow any air out at all. Also the break light and the ABS lights are on. The ABS came on after the breaks got changed. The Break light is blinking and...


Sounds like you have some electrical gremlins that have moved in...

Since the fan does not even come on, and the fuses keep blowing. It sounds like the resistor pack for the blower motor could have failed, or a wire is shorted somewhere.

The ABS could simply be a wire, or sensor that was carelessly overlooked to be plugged back in when the breaks were done. Or it could be more serious.

Jul 05, 2011 | Volkswagen Beetle Cars & Trucks

1 Answer

ABS problem with GMC 2002 Sierra


its a low speed abs activation the problem is in the front sensors they need to be cleaned or replaced they [or one] probably has some corrosion on the sensor --[the 99 chevy tahoes had a limited recall over this issue and the fix was to remove and clean the abs sensor or if to corroded replace ] this problem doesnt set off an abs code or trouble light also sometimes the abs will activate by itself at under 4 mph without even touching brake

May 15, 2010 | 2002 GMC Sierra

1 Answer

MY BREAK AND ABS LIGHTS KEEP COMMING ON.


It could be the ABS unit it's self that is at fault

Mar 18, 2010 | 1994 Ford F150 Styleside Supercab

1 Answer

Tcs light come on along with abs an hand break light


You most likely knocked the electric plug loose when you changed the brakes, go back and make sure they are tight.

Jul 24, 2009 | 1999 Mazda 626

1 Answer

Anti lock abs and traction control light.


did you accidently unplug a rear speed sensor

Feb 27, 2009 | 1996 Cadillac Seville CA Value

Not finding what you are looking for?
Cars & Trucks Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...