Question about Cars & Trucks
Drivers door panel from Citroen c1
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Pretty simple actually. Sounds retarded but here ya go:
Unscrew all the screws visible. This includes the armrest if applicable.
Get a tool from your local auto parts store that looks like a small pry bar that has a little slot in the middle. it almost looks like the weed puller you use to remove dandelions. Seriously...you'll know it when you see it. This thing is a gem and works on ALL door panels. Slip it inbetween the door panel and the metal part of the door and start popping out the panel. You really want to get behind the plastic fastners if you can. Once you get to panel loose, you want to detach any electrical connectors from the door panel switches.
After that, use a little force to work it upwards to clear the door itself. the seal that is butted up against the glass is sometimes tight.
Do what you need to do and installation is in reverse order.
By the way, that tool is less than $10.00!
Good luck and post if you have any problems.
Posted on Mar 16, 2009
two philips screw on the handle ( the one u use to shut the door), one on the far right handside in the middle, one in the other handle ( the one u use to open the door with), after u removed all the screws, put a flat screwdriver at the bottom of the panel and pull it off.
Posted on Feb 18, 2009
First you need to remove the door handle and window crank by pushing back the ring and releasing the handles. Also the arm rest will have screws into the steel door frame that must be removed. The panel itself has plastic snaps that are pushed into holes in the doors steel frame. The trick is to slide a pry bar or even two is better, one on ether side of the clip and force the pin out. You need to be patent and do one at a time. The door panels are made of a less than hard strong material and will brake apart easily especially if they are older. The clips go all the way around the lower three sides and the top will lift off the sill.
Posted on May 07, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Jan 08, 2016 | 2008 Citroen C1 1.0i
Dec 14, 2015 | Cars & Trucks
Sep 27, 2014 | 2010 Citroen C1 1.0
Apr 15, 2014 | 2006 Citroen C1 1.0
May 25, 2012 | 2008 Citroen C1 1.0
Oct 01, 2009 | 2001 Volkswagen Golf
May 03, 2009 | 2003 GMC Yukon XL
749 people viewed this question
Usually answered in minutes!