Question about 2000 Nissan Maxima

1 Answer

Turning off my maxima turns off alot when i slow down at a red light,stop signs and at times at high speed coming of the highway,the tcs and slip lights turn on,i have no idea why.

Posted by on

  • gmtech383 Jan 03, 2009

    I have a 2000 maxima that in first gear will not rev over 1500 without stumbling and sometime dieing out. All other gears  will not do this, but first. If u give it just a little thouttle u can drive  the car without having this happpen. I have a code for a evap purge vavle but never knowen a purge vavle to cause such a problem. also the heat and mode doors dont wook but the control mod lights turn on as u switch  from one to other, it stays on defrost and cold. could this be a bad hvac mod. 

  • hich101 Jan 03, 2009

    some thing told me it might be electrical ...tnk u

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

I would see you local mechanic it could be an electical problem

Posted on Jan 03, 2009

  • lee tossell
    lee tossell Jan 03, 2009

    i would see you local mechanic it could be an electical problem

  • lee tossell
    lee tossell Jan 04, 2009

    thats ok youre welcome ok m8

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TCS Light and SLIP Light turned on


There is a VSS (Vehicle Speed Sensor) on the Transaxle and then there are inputs from the ABS that go into the ECM to correlate the variances.... More than likely, you have a DIRTY ABS Sensor. Clean the sensor and the problem will go away. Be careful not to break the sensor when cleaning it.

Apr 04, 2013 | Cars & Trucks

1 Answer

The ABS, TCS OFF,and SLIP warning lights are on in my 2000 Nissan Maxima. What's the cause and fix?


cud be dirty or low brake fluid----or bad abs module--or more------have system inspected by a brakepro soon before it cost alot or u crash

May 09, 2012 | 2000 Nissan Maxima

1 Answer

Well all the Lights of ABS TCS SLIP started to turn on and i don't why can you tell how can I fix this problem and also tell that TCS was turn off


CANT FIX AT HOME,DEALERSHIP HAS TO FIX.ABS AND TCS SYSTEM HAS TO BE CHECKED WITH SPECIAL DIAGNOSTIC EQUIPMENT.

Sep 20, 2010 | 2006 Nissan Maxima

1 Answer

As I slow down or stop at a stop sign or red light it turns off. It drives good in a highway, as soon as I get out of the highway it turns off, or as I'm driving in the city. Took it to the mechanic can't...


Does it happen in stop and go traffic? If the answer is no and the only time it does happen is at speeds at about 40 mph's or better then its the brake switch its failing to cancell out Torque converter clutch solenoid (TCC). If it happens at all speeds take the vehicle to a shop that does SCOPE TESTING NOT A SCANNER this way they can hook the vehicle up to the SCOPEMETER and drive around with it to see what turns off (other than the vehicle) and causes the vehicle to die.

Apr 09, 2010 | 1998 Oldsmobile Silhouette

2 Answers

P1320 trouble code plus


The P1320 code is essentially a coil primary voltage problem. This is traceable using a labscope or accurate DVOM and perhaps you can isolate one or two coils that still work but are close to failure...but there is a nissan service message recommending replacement of ALL coils with updated/improved models to prevent this type of failure. TCS/SLIP is traction control. Most likely you have a speed sensor issue. Be aware, some vehicles can falsely illuminate TCS because of low tire pressure in a single wheel.

Sep 09, 2009 | 2000 Nissan Maxima

1 Answer

Hello, I bought my Maxima SE 2 weeks ago, the light of "service engine soon" turns on and some times the TCS and SLIP lights are turning on and off and whenever these lights come and go, the...


As for trouble codes, and the dealers recommendation. They are true and accurate, although I would get a second opinion from another auto shop other than the dealer. Do not disclose what you already know other than the problems you are expriencing.

Apr 27, 2009 | 2002 Nissan Maxima

2 Answers

TCS/SLIP & Check Engine Light Warning


TCS is Traction Control System,and all TCS's are controlled though the Anti Lock Braking (ABS) system.Here's how it works:Each wheel,or in some cases,only the drive wheels have a speed sensor mounted near the hub or axle,and sends a speed signal to the PCM (Powertrain Control Module).The PCM monitors wheel speed continuously,and if it sees a speed out of the ordinary,say for example the right rear tire is spinning and traveling at a much higher speed than the left rear,the PCM will pulse the brakes through the ABS system on the right rear to slow down the right rear so that the left and right wheel speeds match up,this is how the traction control works.So,if you have a TCS problem,the PCM will see this and set a Dignostic Trouble Code (DTC).You need to pull the DTC's out of the system with a scan tool,diagnose and repair the DTC's.It could likely be something as simple as a malfunctioning wheel speed sensor,but you won't know until the codes are pulled out,as this will point in the general direction.Good luck.

Aug 09, 2008 | 2003 Nissan 350Z

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...