Question about Cars & Trucks

Open Question

How much psi does the mitsubishi cedia GDi gas tank pump push to the high pressure pump

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

latoss101
  • 47 Answers

SOURCE: gdi 1800 cedia wagon-odometer 80,000km exact, starting, no power

yes

Posted on Jan 03, 2009

  • 272 Answers

SOURCE: gdi fuel pump galant

http://www2.partstrain.com/store/?Ntt=Fuel%20Pump&N=1676%2011327%204294964190

Be sure you scroll down to the ones for all engines. The top few are for 2.4 Liters only. It is an in tank fuel pump and you'll have to drop the tank to install.

Posted on May 18, 2009

  • 67 Answers

SOURCE: Atmospheric Pressure SensorI have a 2001 Mitsubishi Galant GDI. C

Its located in the air filter housing....The volume air flow sensor also incorporates the barometric pressure sensor and the air intake sensor....If you are replacing either of these sensors replace the volume airflow sensor.......


Posted on Feb 15, 2010

  • 2 Answers

SOURCE: gdi 1800 cedia wagon-odometer 80,000km exact, starting, no power

i can confirm with u that the end of the intake camshaft is broken...tat's why the fuel pressure is low.intake camshaft attach to the fuel pump to boost the pressure.for sure u won't believe what i say...i've seen more than 20 gdi model having tis problem..

Posted on Nov 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find the high pressure pump on and the Mitsubishi pajero GDI and the fuel pressure sensor?


I don't think there is a pump, it is done with engine oil pressure at the injector.

Jul 12, 2016 | Mitsubishi Cars & Trucks

1 Answer

2000 MITSI cedia GDI starting issues


have a fault code reading done as there is a sensor causing the problem that you haven't yet checked.

Sep 11, 2014 | Cars & Trucks

1 Answer

Mitsubishi Pajero Exceed 1997 Model Engine #6G74 GDI V6 3500,no power,I suspect its the engine control unit,I order the ECU,but still no power,probably its crankshaft and camshaft sensor.


I solve this problem with Mitshubishi Pajero GDI 6G74 like this: remove the two little filters from the high pressure pump and ,if necessary, insert a external gasoline filter.

Mar 24, 2011 | Mitsubishi Montero Cars & Trucks

5 Answers

I have a mitsubishi lancer cedia model 2000 frequent stall when driving i switch it off and on again in the ignition and come to live again for a few miles and does the same again what could be the cause


If you have the GDI model,they were designed to run on very lean air/fuel ratio.
Once the mileage is up a bit a lot of problems can be traced back to a high carbon build up in the intake manifold.

Apr 24, 2010 | 2002 Mitsubishi Lancer

3 Answers

Gdi engine issues


I got the same trouble, launch shows Air Flow Sensor, Fuel Pressur switch. Ireplace both few hours OK but again same trouble.
GDI got a common truble its high pressor fuel pump.
check fuel pressor if its low thats the prob
bye

Mar 23, 2010 | Mitsubishi Outlander Cars & Trucks

1 Answer

Gdi fuel pump galant


http://www2.partstrain.com/store/?Ntt=Fuel%20Pump&N=1676%2011327%204294964190

Be sure you scroll down to the ones for all engines. The top few are for 2.4 Liters only. It is an in tank fuel pump and you'll have to drop the tank to install.

May 18, 2009 | 1997 Mitsubishi Galant

3 Answers

Gdi 1800 cedia wagon-odometer 80,000km exact, starting, no power


Hi it sounds like your high pressure pump needs replacing. the pump can be repaired but you will have to find someone who knows about it, i fix a lot of them before. there is a spring that pushes out the piston in the pump so it can compress the fuel that spring losses its ability to extract the piston back out. i have pictures of one if anyone wants to see

Jan 03, 2009 | 2002 Mitsubishi Lancer

1 Answer

I have ran out of petrol and now it won't start. What do we do? It's a Mitsubishi Cariot, GDI 4 cylinder. I have put fuel in it does it need bleeding?


Being a gas engine you shouldn't have to bleed it. If you have run completely out of fuel, there's a high probability that the fuel pump could have gone bad. The pump, which is located inside the fuel tank, relies on the fuel to lubricate and cool it during normal operation. If the fuel supply ran out and the pump ran dry there's a good chance that it burned out. On most engines there is a test port on the fuel rail where you can check for pressure. Hope this helps.

Nov 02, 2008 | Mitsubishi Diamante Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...