Question about 2008 Mazda Cx 9

Open Question

How do Iremove and replace a rear wheel bearing on a mazda cx 9

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 713 Answers

SOURCE: how to change rear wheel bearing in Mazda 6 2002

Pretty easy job, if you have rear disc brakes on the car remove the caliper and brake rotor and you will see the hub bearing it just bolts one of two ways from the rear of the backing plate there will be 4 bolts holding it on, or there will be a dust cap in the center of the bearing, remove it and you will see a nut remove the nut and take the hub off and replace. If you have rear drum brakes remove the brake drum and remove the hub the same way should not have to remove the brake shoes at all if you are careful they will stay in place.

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Video of how to replace rear wheel bearings of a Mazda 323, 1.3,sting,front wheel power


take the rear hub off
you will need a hydraulic press or a vice to push bearing out and then in.

Jul 09, 2016 | Mazda Cars & Trucks

1 Answer

My steering wheel on my mazda cx9 will not turn


Try attempting to turn the key st the same time you try to work the steering wheel side to side. It may take a little while, but it should unlock the wheel in a bit.

Mar 03, 2015 | 2009 Mazda CX-9

1 Answer

Cx-9 with 59,000 miles just serviced vibrates and shakes terribly when accelerating between 45-55 mph in gear 5 especially


It sounds like your some of your tire balance weights might have come undone, meaning you need to have your tires balanced. Or there may be a more serious problem with a tie rod end being wore out, or a ball joint or possibly wheel bearing. The wheel bearing would be accompanied by a whining, or howling. I'd steer toward a tie rod, or out of balance tire and wheel. Hope this helps!

Jul 21, 2014 | 2010 Mazda CX-9

1 Answer

How to adjust headlights


In my CX-9 on the left side of the drivers dash, below the steering wheel, there is a little adjustment wheel for headlight up and down adjustments. I believe it has 3 or 4 positions. Check out the video at 1:13 mins in.
2011 2007 Mazda CX 9 Automatic Xenon Exterior Lights Tutorial

Jun 02, 2014 | 2007 Mazda CX-9

1 Answer

AIR BLEND DOOR MAZDA CX 9


could be blend door or possible heater core is half clogged check your blend doors and also check your switches for heater control start with checking switch

Dec 05, 2013 | 2007 Mazda CX-9

1 Answer

2008 Mazda 9 Fuse Box DIagram


On this website, you find fuse box diagram and description

Mazda 6 (2006 - 2008)
Mazda 6 2006 2008 fuse box diagram Auto Genius

Mazda CX-9 (2007 - 2010)
Mazda CX 9 2007 2010 fuse box diagram Auto Genius

Dec 31, 2012 | 2010 Mazda CX-9

2 Answers

How do I replace a battery for a Mazda CX 9 keyless remote? I don't know how to get the old battery out.


a flat head should be all you need to pop open the remote and re place the battery

Feb 03, 2011 | 2008 Mazda Cx 9

2 Answers

I Had the tires rotated on my 2008 mazda cx9 at 13,000 miles in our local shop here,then i noticed a humming sound coming from front of vehicle and only when it approaches 50 to 55 mph,could it possibly be...


The noise is most likely caused by the different wear pattern on the tire that came from the rear of the car. The difference in the alignment between the front and rear suspension systems causes the tires to wear accordingly. It will take some time for the tires to wear in to their new environment. The noise should go away gradually. You should also check your tire pressure to make sure you don't have an improperly inflated tire.

Dec 16, 2010 | 2008 Mazda Cx 9

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...