Question about 2002 Mitsubishi Lancer

3 Answers

Gdi 1800 cedia wagon-odometer 80,000km exact, starting, no power

4g93 gdi engine starts
wont rev above 3000 rpm-starts misfiring
cuts off as i mash the x
sounds like starving for air
scan tool once said fuel rail sensor
swapped - air flow sensor, fuel pump & fuel pump (tank)
is there a fuel pressure boost pump on the engine?

Posted by on

  • 3 more comments 
  • jonathanbran Jan 12, 2009

    Have the same problem just as you described, but can't find th esolution, so please assist me if you can.

  • Anonymous Mar 13, 2009

    Same here

  • jason eulette Jul 23, 2013

    replace the computer

  • Joseph Melville
    Joseph Melville Oct 23, 2014

    I know alot about these cars because i fix them, at the end of the intake cam where there is the star like end that engage the HPP high pressure pump, over time that gets worn out and the cam need replacing, so in other words the pump is no longer being pumped, so the car is running on the fuel tank pump if you turn on the AC and it gets worst them you should be looking and the gdi pump or the intake cam

  • Peter Kalanzi Dec 06, 2015

    Hi, I have a 2005 Mitsubishi Lancer Wagon, 4G93. It wont rev over 4000. It has no error codes, I changed the Mass Air Flow intake sensor and no change.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 24 Answers

Hi it sounds like your high pressure pump needs replacing. the pump can be repaired but you will have to find someone who knows about it, i fix a lot of them before. there is a spring that pushes out the piston in the pump so it can compress the fuel that spring losses its ability to extract the piston back out. i have pictures of one if anyone wants to see

Posted on Nov 12, 2014

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I can confirm with u that the end of the intake camshaft is broken...tat's why the fuel pressure is low.intake camshaft attach to the fuel pump to boost the pressure.for sure u won't believe what i say...i've seen more than 20 gdi model having tis problem..

Posted on Nov 18, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

Yes

Posted on Jan 03, 2009

  • sonesh_kumar Nov 03, 2010

    Not helpful what was the solution?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mitsubishi lancer cedia wagon wont let me rev above 2000 rpm and stalls afterwards it jerks down the road when driving iv cleaned the fuel filter what could the problem be


it is in limp mode because of a problem either in the engine or transmission
run the fault codes and fix the codes that come up

Jul 30, 2016 | Mitsubishi Cars & Trucks

1 Answer

2002 jaguar xj8 when I drive it won't go over 3000rpm


Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Dec 15, 2015 | Jaguar Cars & Trucks

1 Answer

2000 MITSI cedia GDI starting issues


have a fault code reading done as there is a sensor causing the problem that you haven't yet checked.

Sep 11, 2014 | Cars & Trucks

3 Answers

4g93 gdi engine starts wont rev above 3000 rpm-starts misfiring cuts off as i mash the x sounds like starving for air scan tool once said fuel rail sensor swapped - air flow sensor, fuel pump & fuel...


Hey have you tried disconnecting and re connecting the battery? my mitsi carisma startd doing that so i rang up dealer and aparently they do it when the computer thinks there is something wrong with the engine, so it enters slow mode (or turtle mode or something) so that minimal damage is done while you drive it slowly to yr mechanic. Could be complettly wrong tho. Good luck.

Nov 03, 2010 | 2002 Mitsubishi Lancer

1 Answer

Car cuts out at idle


idle control valve. bad plug wires and bad plugs will all cause that as well as a air leak in the vacumn hose on galant

Jan 21, 2010 | 1998 Mitsubishi Galant

1 Answer

Engine starts cutting out at 3000 rpm and wont rev up


fuel pump pressure too low.causing lean mixture .

May 12, 2009 | 1991 Honda Civic

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

2,015 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...