Question about 2003 Kia Sedona
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.
Posted on Dec 31, 2008
Hello, my name is Mario.
1. Disconnect battery negative cable.
2. Drain engine coolant
3. Remove bolt and nut for thermostat housing
4. Remove the old thermostat
5. Put a new thermostat and gasket (Install thermostat into cylinder head with jiggle pin positioned up.)
6. Place thermostat housing
7. Fill radiator with engine coolant
8. Connect battery negative cable
9. Start engine and check for leaks.
Posted on Jan 10, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to remove the bolts securing the outer handle on
Posted on Sep 15, 2009
Tips for a great answer:
May 10, 2016 | Kia Cars & Trucks
Oct 16, 2015 | 2002 Kia Sedona
May 29, 2013 | 2003 Kia Sedona
Feb 01, 2013 | 2003 Kia Sedona
Jul 31, 2011 | 2003 Kia Sedona
May 22, 2010 | 2003 Kia Sedona
Feb 06, 2010 | 2003 Kia Sedona
Dec 29, 2008 | 2003 Kia Sedona
74 people viewed this question
Usually answered in minutes!