Question about 2011 Hyundai Elantra Touring

Open Question

How do you change the headlight assembly for a 2011-hyundai-touring-rt. assembly

Need to change entire headlight assembly

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ghost45
  • 1280 Answers

SOURCE: change the headlight assembly

Two or Three 10mm bolts secure the assembly in place. remove them, then remove the assy and disconnect the harness connectors. Installation is reverse of removal.

Posted on Oct 18, 2009

Ad
232K7
  • 26 Answers

SOURCE: changing the tail light assembly on a 2004 hyundai santa fe

lift the tailgate, and you should see 2 screws on the side of the lamp assembly. remove the screws, and remove the lamp assembly by sliding it sideways away from the vehicle. you will be able to access the bulbs & sockets once the taillamp has been released.

Posted on Apr 14, 2009

  • 1129 Answers

SOURCE: 2006 Elantra; Does the entire headlight assembly

On these the bulb unscrews from the back

Posted on Jul 14, 2009

  • 1 Answer

SOURCE: How do I change a headlight on a 2007 Hyundai?

I thought I removed all of the bolts - a total of three (3) - but there are actually four (4), including one (1) inside, next to the radiator. It is difficult to see, and a pain to remove, but once out, the assembly can be easily removed.

Posted on Nov 04, 2009

ghost45
  • 1280 Answers

SOURCE: i need to remove the

Go to Hyundai's web side and register your vehicle (by VIN number). Then you'll have access to shop manuals, wiring diagrams and Technical Service Bulletins.... Particularly, shop manuals... then you'll see how complete/incomplete they are.

Posted on Mar 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the headlight bulb. i cant figure it out


It is easiest to pull out the entire headlight assembly. Usually there are 3 or 4 NON adjusting bolts that hold it in, and the entire assembly comes out allowing access....

Apr 09, 2011 | 2003 Chrysler Sebring

1 Answer

Changeing headlights


I assume you're referring to the bulbs and not the entire assembly:

First, you have to remove the turn signal assembly. For this, you need a small star shaped screwdriver and remove the 1 screw holding the turn signal in place. Pull straight out and remove the bulbs from the signal assembly by turning the sockets about 1/4 turn. Set that aside.
Second, there's 3 bolts that will be holding the headlight assembly in place. One is accessable from the engine compartment with the hood up. The other two are located under the headlight. (All of them face the front of the car). Remove all three and the headlight will be able to swing out, giving you access to the sockets and bulbs. Remove the bulb connector from the bulb first, then twist the bulb retaining ring and pull the bulb straight out after the ring is off.
Reassembly is the reverse of disassembly.

If you're looking to completely remove the entire headlight assembly, it's the same process, but the piece that lets the headlight swing out (instead of coming off completely) must be removed. It's a simple plastic ball and socket swivel. Just tug hard and the ball will come loose from the socket.

If I've helped, please vote!

Feb 25, 2011 | 2002 Dodge Durango

1 Answer

Can the factory headlight lens covers on a 2001 Mercury Cougar be removed and cleaned ? I can remove the entire healight assembly and change the bulbs, but the inside of the healight cover is dirty and...


The lincoln LS had the same problems, and the lens was held to the headlight assembly with a sticky glue.
To remove them, some guys were successful by warming the headlight assembly in the oven untill the glue softened up enough to be pulled apart.
Be careful if you try this, to much head and..oops I melted my headlight

Oct 13, 2010 | 2002 Mercury Cougar

1 Answer

How do I change the headlight on a 2004 Silhouette? It seems really hard to pull out the turn signal assembly that the instructions say to do.


You need to pull the entire assembly, no fear, it is meant to be done that way... Then you can easily change the headlight...

Mar 14, 2010 | 2004 Oldsmobile Silhouette

1 Answer

Headlight bulb size for a 2002 grand prix


You need a 9007 bulb

In order to change the bulb, just loosen/remove the two bolts holding the entire light assembly in (side marker, headlight and turn signal) Once these bolts are removed the entire assembly will shift / slide out away from the center of the vehicle. Once the assembly is removed you will have access to the wires/bulb.

Oct 28, 2009 | 2002 Pontiac Grand Prix

1 Answer

1988 buick century headlights


To change the low beam headlight on the 2001 Lesabre, the headlight assembly must first be removed from the car. It is really quite simple to do. There are two bolts on the top of the assembly that must be removed - that is all! The entire assembly comes out and gives easy access to the low beam bulb. Give it a 1/4 counterclockwise turn to remove it. Plus in the new one (#9006) and reverse the procedure.

Jun 19, 2009 | 1988 Buick Century

1 Answer

How to replace front headlight


Pop the hood and remove the black shroud that covers the space between the grill and rad mount. you should find 2 bolts holding the entire headlight assembly and just back them out. It will come out in 1 piece. You can now change the bulb or replace the entire assembly.

Apr 10, 2009 | 2001 Pontiac Sunfire

1 Answer

Signal light change.


There is one 10mm Bolt on the top of the light and three 10mm nuts on the back of the light. You will need to use a 10mm wrench to remove the nuts because they are in a tight place.

After the 1 bold and 3 nuts are removed, the entire headlight assemble will pull straight out. You don't need to take the headlight bulb out because there should be enough wire to pull out the assembly far enough to get to the turn signal bulb. This will allow you to change the turn signal bulb which should be a 4157 amber bulb.

When putting the headlight assemble back in the van, there is a plastic pin in headlight assembly that goes into a hole in the front fender for alightment. Don't force the light. Take your time and the headlight assembly will go back in the van smoothly.

Mar 17, 2009 | 1999 Plymouth Voyager

1 Answer

Headlight bulb change


there should be two rods about 4" long with a 90 degree bend on the top at the rear of the light assembly straight down thru the top, pull them up and the whole assembly will pull out

Dec 26, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
2011 Hyundai Elantra Touring Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...