Question about 1993 Mercury Grand Marquis
Need location of autolamp dual coil relay
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
The starter relay is in position #56 of that box.
Posted on Mar 23, 2009
i had this problem on my 2004 and it was the headlight module when it gets hot it turns out, and comes back on when it cools off
Posted on Aug 11, 2009
that is caused by a "circuit breaker" not a relay. when it starts flashing, carefully go over the harness from the firewall to the rf headlamp, there is a short somewhere.
Posted on Oct 15, 2009
There are eight COPs (coil-on-plugs) to remove. Using a 7mm or 9/32" socket, remove each bolt securing each COP to the intake manifold on top of the engine. Remove all eight COPs, and the spark plugs are underneath. When replacing the spark plugs, use only the proper Ford/Motorcraft plugs, even if they cost twice as much as the aftermarket ones. You will avoid further headaches this way. Hope this helps.
Posted on Mar 30, 2010
Tips for a great answer:
Jan 14, 2017 | 2002 Mercury Grand Marquis
Aug 26, 2015 | 1997 Mercury Grand Marquis
Apr 20, 2014 | Cars & Trucks
Mar 13, 2014 | 2000 Mercury Grand Marquis
Aug 30, 2011 | 2001 Mercury Grand Marquis
Aug 02, 2010 | 1996 Mercury Grand Marquis
Jul 13, 2010 | 1997 Mercury Grand Marquis
Dec 27, 2009 | 1993 Mercury Grand Marquis
Jul 31, 2009 | 1993 Pontiac Grand Am
Jul 11, 2009 | 2000 Mercury Grand Marquis
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: