Question about 2002 Ford Focus

1 Answer

The headlights do not come on but the high beams do this keeps happening and they say it blew a fuse do high beams and low beams run off a different fuse and would'nt a dead short be causeing this

This has happend several times and the dealer keeps saying it is a fuse i think it is a short ..I dont know if the high beams and low beams run off the same fuse or seperate fuses

Posted by on

1 Answer

Forget the dealer,they obviously don't care to help you

They say it is a fuse,why don't they resolve the issue

Go to a competent repair shop

Posted on Oct 28, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ourhowse
  • 2007 Answers

SOURCE: which fuse controls the low beam headlights?

Does the high/low indicator on your dash go on and off?

Posted on Jun 04, 2009

  • 326 Answers

SOURCE: 2008 Ford F-250 Low beams do not work. High beams are fine.

just remove all the connections as it could be malfunction in the switches and the wirings needs to be rechecked to make it proper.other option could be bad dimmer switch. You will need to replace the turn signal/ dimmer switch as an assembly.to replace you will need to disable the air bag, drop the column, pull the wheel

Posted on Jan 10, 2009

duane_wong
  • 6826 Answers

SOURCE: No low beam ,but have

Check for bad ground for low beam and bulb.

Also, check that the high beam works independently of the low beam for that mode.

Posted on Sep 18, 2010

  • 373 Answers

SOURCE: I have no low beam

it could be in the switch

Posted on Feb 07, 2009

  • 31 Answers

SOURCE: my low beam headlights don't work.. I'm risking

is not a fuse
is the headlight column mounted switch
or the headlight switch itself
i assume your bulbs are good

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low beam/High beam fuse keeps blowing


Have you changed the bulbs lately......
Turn on with your fan flat out and rear demister on, see if that makes a difference.
Have you got the correct fuses in?

Mar 12, 2014 | Mercury Cars & Trucks

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

1 Answer

Right front headlight not working on low beam


Have you checked the relays and fuses,high and low beam run on different relays and fuses.

May 07, 2012 | 1995 Ford Explorer

1 Answer

I have no headlights on my 2004 f 150. Fuses are good but i do not have low or high beams. Bulbs appear to be good. I have running lights and fog lights


Based on what you have described it sounds like a bad headlight switch. Since the low and high beams generally use different fuses that can be ruled out. (although checking to be sure is a good idea) Usually both high and low beams go through the headlight switch that's where I would look first.

Oct 04, 2010 | 2004 Ford F150

3 Answers

Low beam not working but high beam is-Pontiac Vibe 2005


I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Jan 15, 2010 | 2006 Pontiac Vibe

1 Answer

03 Venture headlights stopped working. Everything else works--high beams, parking lights, instrument panel. I can't find a specific fuse for them. Any ideas?


When we pulled the headlights out both low beams were blown and the high beams were still OK, so we replaced both of them. I can't imagine that they both just blew at the same time, but maybe 1 had been out and I did not realize it till the other one blew? Thanks anyway.

Mar 22, 2009 | 1999 Chevrolet Venture

1 Answer

Headlights


well if you have a beam!!! that means fuse are okay if you have a spare bulb try it and see if this gives you back a low beam as well as hi beam if not look under hood in fuse cluster open lid diagram shows witch is the head light relay good place to start.John

Dec 29, 2008 | 2006 GMC Envoy

4 Answers

Low beam headlights do not work, but high beam headlights do


Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.

Jul 16, 2008 | 1991 Nissan Pickup

Not finding what you are looking for?
2002 Ford Focus Logo

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...