Question about 1992 Chevrolet C1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.
Posted on May 15, 2008
Is the fuel pump really bad?
Our son's erstwhile Ford something had a shock sensitive switch that when tripped by a big pothole, shut the (electric) fuel pump off and had to be reset before it would function again.
Posted on Jul 02, 2008
You're going to have to bleed the system alot on those trucks. Just remove the return line and have an assistant turn the steering wheel back and forth just enough to engage the pump and filling the resevour while doing this. Keep bleeding until you have a good flow of P/S fluid out with no air bubbles. This can take a while.
Posted on Aug 24, 2008
SOURCE: removing power steering pump
To replace the power steering pump, proceed as follows:
Posted on Feb 27, 2009
Tips for a great answer:
Sep 01, 2015 | Cars & Trucks
Aug 05, 2014 | 1993 Chevrolet C1500
Oct 22, 2012 | 1996 Chevrolet C2500
Jun 26, 2010 | 1993 Chevrolet Suburban
Mar 16, 2010 | 2000 Chevrolet Silverado
Jun 04, 2009 | 1999 Chevrolet Silverado 1500
Jan 12, 2009 | 2001 Chevrolet Silverado 1500
Dec 14, 2008 | 1998 GMC Sierra
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: