Question about 1999 Toyota Corolla

1 Answer

Blower motor relay - 1999 Toyota Corolla

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 36,580 Answers

There are two relays in the blower motor circuit. For troubleshooting, check the 10A GAUGE fuse in the engine room junction box which feeds power to the integration relay in that same location. With the ignition lock in ON or START position, power is applied to the HTR relay in engine room relay block 6 and the blower motor operates (provided the 50A HTR fuse in that block is OK)

Posted on Oct 28, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

A.c. cooling fan runs constantly on high even with ignition off and key out


A/C - Heater blower motor ! What make , model and year vehicle ? Manual or automatic climate control ? Could be a bad blower motor control module , a high blow relay contacts stuck closed .

Mar 28, 2017 | Cars & Trucks

1 Answer

Where is the Blower motor relay on a 2002 Ford Econoline E150, and how do you change it so both the front and rear blower motors work on all 3 speeds?


There would be two relay's , one for front an one for the back . And the relay would be for high speed only . And it just so happens there are two AUX blower motor relay's .
Auxiliary Blower Motor Relay C403
Left rear corner of vehicle, above wheelwell
Auxiliary High Blower Motor Relay C404
Left rear corner of vehicle, above wheelwell

Front blower motor relay - K73 top left , Six relay's at top left .


check it out here http://www.bbbind.com/free_tsb.html

Feb 17, 2017 | Ford Econoline Cars & Trucks

1 Answer

Blower wont blow high or low speed, and is not the fuse?


blower motor relay. blower motor doesn't have fuses only the relay controls are fused. change blower motor relay High and low have separate relays

Mar 22, 2011 | 2005 Nissan Sentra

1 Answer

Front blower motor will not blow out heat or nothing, if i replaced the relay in the fuse box in side suv could that work. relay for blower motor, also not sure which one is the relay in the fuse box.


This may be a faulty Blower motor resistor, usually mounted inside the blower motor air box, or defective blower motor. There is no single Relay for the blower motor.

Dec 11, 2010 | 2004 Mitsubishi Endeavor

1 Answer

I am trying to figure out which relay is for the front blower motor. anyone know?


Hi!!
Look ion the INSTRUMENT PANEL Fuse Box, there are two blower motor relays and two fuses, look on the inside of the relay cover for a diagram. The relay you are looking for should be labeled FRONT BLOWER MOTOR RELAY and the rear one should say AUXILIARY BLOWER MOTOR RELAY.
The TWO fuses with the same name on passenger compartment fuse box check:
  • fuse #39 30A fuse. AUXILIARY BLOWER MOTOR
  • fuse #36 30A fuse. AUXILIARY BLOWER RELAY

1kbron_60.gif

Dec 09, 2010 | 1996 Ford Windstar

1 Answer

Location of heater blower relay on '92 Accord


If the fuse is good,check to see if there is voltage to the blower motor,if there is,replace the blower motor.Sometimes,not always,if you bump the blower motor,it will start working,if this happens,then the blower motor is bad,if it does not,the fan switch could be bad,but the relay is usally near the blower motor.Testing it with a test light is the best way to test it,ground one end of the test light,the other end has a point on it.Use the piont of the test light to touch all the legs on the relay,with the key on,and the fan on high.The test light will light up,on almost all the legs,but it will also activate the relay when you touch the right leg of the relay,the relay needs to stay plugged up as you do this.If you can not access the legs of the relay,because of a skirt on the relay,push the point of the relay into the wire that you are testing,or into the plug,near the leg of the relay.The legs I am refuring to,are the prongs on the relay.If the relay clicks and turns the fan on,when you touch the right one,then the fan,and the relay are good,it will be the blower fan switch.Now if you already have high,blower fan,and the lower speeds are the problem,replace the blower resister,It is mounted right next to the blower motor,and has about 7 wires plugged into it.

Jan 09, 2010 | 1992 Honda Accord

1 Answer

Blower working on top 2 settings but no air comeing from vents


Hi

Thanks for using FixYa. The possible causes due to which the blower is not working normally are fuse, blower resistor or a bad blower motor. Test the voltage at the blower with a test light. Please check the motor relay switch fuse under the dashboard. Use a multi meter to measure ohms for continuity. If these are fine, bypass the blower motor relay switch to make sure blower motor is running fine. Motor relay switch is right next to radiator fan relay switch under the hood. Pull out the blower motor relay switch to see 4 female pin holes. Test the relay switch using a 12 volts power source and a multi meter to measure continuity. If fan works after jumping the pin holes, then blower motor is fine but relay switch may be faulty. You may also need to replace the blower motor resistor. If still the problem persists, then you need to replace the blower motor.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 09, 2009 | 1997 Honda Civic

3 Answers

Location of blower motor and relay(GM guy)


Behind the vacuum heater controls in the dash, they lead to a relay mounted there. That was the relay that was bad on my Dodge. It was a digital readout one.

Jun 30, 2009 | 1991 Chrysler New Yorker

1 Answer

Blower motor relay 1995 Ford econoline


Relays Blower Motor Relay(s)
The blower motor relay is located in the relay panel on the left front fender apron (16054). When the blower motor circuit is energized, the contact within the relay closes to complete the circuit for blower motor operation.

Mar 21, 2009 | 1993 Ford Econoline

Not finding what you are looking for?
1999 Toyota Corolla Logo

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...