Question about 1997 Buick Park Avenue
SOLUTION,,,THERE IS A ACCULATOR MOTORISED FLAP ON THE OUT SIDE OF THE HEATER BOX ON THE PASSENGER SIDE OF THE CAR ,,,ITS PROBABLY STUCK OR IN MY CASE IT WAS THE MOTOR IN INSIDE OF FLAP IS BAD,,,,YOU CAN TURN THE FLAP CLOSED MANUALY ,,,TURNING WITH A FLAT HEAD SCREW DRIVE , CLOSE IT WILL BE GOOD AT LEAST TILL SUMMER WHERE YOU HAVE OPEN IT MANUALY,, HOPE THIS HELPS,,,NEIL ....ROCHESTER MN.
Posted on Oct 30, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like the drivers temp door actuator is not working should be located on the drivers side of the air box down by the gas pedal or center dash area.
Posted on Nov 06, 2008
Try Disconnecting the Negative Battery Cable for approx 30 secs.. ( make sure the radio is Off ) Then lemmie know.. Thanx
Posted on Mar 10, 2009
SOURCE: my 1997 buick park avenue
U need to replace the air temperature control blend door actuator motor, this requires removing the dash to access the motor for the blend door.
Posted on Apr 13, 2009
Tips for a great answer:
Apr 28, 2014 | 1998 Buick Park Avenue
Sep 24, 2010 | 1994 Buick Park Avenue
Jun 27, 2010 | 1997 Buick Park Avenue
Apr 02, 2010 | 1996 Buick Park Avenue
Apr 13, 2009 | 1997 Buick Park Avenue
Mar 09, 2009 | 1999 Buick Park Avenue
Dec 26, 2008 | 1999 Buick Park Avenue
Oct 03, 2008 | 1998 Buick Park Avenue
107 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: