Question about 1989 Mazda 323

2 Answers

1989 mazda astina 323 5 spd manual clutch fluid??

1989 mazda astina 323 5 spd manual does it need clutch fluid if so where does it go? cannot find a clutch fluid resovouir

Posted by on

  • Anonymous Mar 26, 2014

    need replace alternat
    or

  • Anonymous Mar 26, 2014

    need replace alternator

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 201 Answers

Open your bonnet check to see @ gearbox if the-res is cable, or a cylinder, the cable is Usualy visible on the top of the gearbox if theres a cable theres no clutch flu-ed needed. Note that your gearbox uses oil. Usualy on older models like 1989 the use a clutch cable no flu-ed needed

Posted on Jan 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 100 Answers

Check the brake fluid resovoir, on the side there could be a hose coming off it part way down the side sharing the brake fluid to the clutch master cylinder

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda 323 clutch


yes basil is my son

Feb 27, 2014 | Cars & Trucks

1 Answer

Mazda v6 timing marks astina 1994


There should be little groves on the crank pully 4 or 5 marks

Nov 09, 2013 | 1989 Mazda 323

1 Answer

My 1994 mazda 323 astina automatic revvs high and low. what's the problem


When does is rev high and low? If it does this at idle check for a vacuum leak or maybe a blocked airflow

Jan 12, 2013 | 1994 Mazda 323

1 Answer

How do I change the rear brakepads in my 1990 mazda astina?


go please to www.automecanico.com translate the page and search for your topic and fix it.
God bless you

Oct 13, 2012 | 1989 Mazda 323 Astina

1 Answer

My mazda astina 323 auto, wont get top gear now what could be the most likely cause please. t proba


Hi there:
From your description I would say the clutch is failing. If the engine speed increases when it's in gear and the vehicle doesn't that is also a tell tale sign it's the clutch.



Test it and check if some fault code is stored in the PCM and TCM.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 07, 2012 | 1989 Mazda 323 Astina

1 Answer

2000 model mazda 323 astina cylinder head bolt torque specs


Three stages with new bolts (a must), 1st 60 pounds, then 70 pounds then final torque is 80 FT Pounds.

Feb 16, 2012 | Mazda 323 Cars & Trucks

1 Answer

1989 Mazda truck 4 cyl B2200 series -- clutch is gone or fluid. Are these clutches hydraulic? Very ignorant when comes to mechanics. If fluid, where do I check the fluid? I press clutch pedal to floor but...


check under your hood for a another cap looks similar to a brake fluid resouvior see if its empty.if it is you probably blown the seal on your slave cylinder its what throws your clutch out.

Dec 07, 2009 | 1989 Mazda 323

1 Answer

How to overhaul the transmision for the 1993 mazda astina


I assume you are talking about an automatic transmission?

This is probably a job you want to have done by a professional. You might just need to have the bands adjusted to the correct torque.

You could try changing the transmission fluid, and filter.

Apr 11, 2009 | 1994 Mazda 323

1 Answer

Battery for 1997 Mazda 323 Astina 5dr hatch


It's fine to use a battery with a higher cold crank rating than original. Consider the rating in the manual to be a minimum requirement. You'll be fine as long as the physical dimensions and terminal placement are compatible with your car. The battery manufacturer's guide should tell you which battery fits your car.

Mar 03, 2009 | 1994 Mazda 323

1 Answer

Gears sticky when changing, sometimes crunchy even?


It looks incorrect clutch adjustment, first inside the car depress the clutch pedal by hand and see if there is a free play moor then 10 mm, if so , slacken the locknut at the cable end in engine compartment, now turn the adjustment nut until the distance from the release lever to the roller on the cable is about 3mm, tighten the locknut after adjustmen

Jan 13, 2009 | 1988 Mazda 323 Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...