Question about Cars & Trucks

1 Answer

Peugeot 406 key fob not operating central locking

Replaced micro switch and button central locking not working

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

406 FOB / PLIP PROGRAMMING :

The 406 deadlocking remote control has specific button controls, and if the vehicle has two controls, one is set as primary and the other as secondary.

When replacing the Plip, a Primary or Secondary Plip are different part numbers and must be ordered as required. The white label inside the Plip is labelled PRIM or SEC.

1. Turn the Ignition switch ON.

2. Press the large Plip key button (Primary Plip)

3. Within 10 seconds press the large Plip key button (Secondary Plip)

4. If there is one remote, press the Primary plip button twice.

5. Turn ignition OFF.

6. Test Plip's for correct operation.
NOTE : On some 406 models, Plips cannot be re-synchronised unless the battery has been disconnected for 1 minute

Posted on Jan 31, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: peugeot 406 central locking

you need to reprogram the fob

Posted on Oct 07, 2008

emissionwiz
  • 76691 Answers

SOURCE: peugot 406 central locking key fob not working

if you got the FOB really wet then the circuit board is ruined, you are going to have to replace it.

Posted on Nov 02, 2009

  • 1 Answer

SOURCE: i need to reset my peugeot 406 key fob

Had same trouble with my 406, fixing no problem, with new battery in fob, insert into ignition, turn key, BUT DO NOT START ENGINE, hold button for about 10 seconds release button and remove key from ignition, then try and see if doors lock on remote, if not try again, had to do this a couple of times, and it worked, sorry to say that now my key fob button has completely fell apart, through ware and tare

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peugeot 406 central locken locks then unlocks


Hi. usually caused by faulty drivers door lock motor. It controls the rest so if it fails then it will stop the rest operating properly. check the wiring in the door shut loom for broken wires. Jon.

May 03, 2014 | 1999 Peugeot 406

1 Answer

How do you reset the key fob on an old peugeot 405.. 1 button type


There are 2 types, IR that has a little bulb next to key and rf. IR type

1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.

2. Hold the Plip key close to the central locking receiver mounted in the roof console.

3. Press the large plip button and then the small plip button on the remote.

4. Repeat for second Plip key if required.

5. Turn the ignition OFF.

6. After 5 seconds the Plip should now operate.

RF type

1.Switch off the ignition

2. Switch on the ignition

3. Immediately after switching on the ignition, press the large remote button

4. The remote should now be working again.


Jan 07, 2011 | 2005 Peugeot 405

1 Answer

Central Locking Issues on Peugeot 406 exec 2.2 hdi (2002)


Hi,just reading with interest" Ianhende's" problem with his 406, I have the same sort of problem with a 2002 406 hdi (110) i.e hazards going off,plus central locking turning on & off whilst driving. have replaced battery, the mechanic is thinking that it is to do with a faulty door lock, any ideas out there ???? ajc.jlc@tiscali.co.uk

Feb 12, 2010 | 1991 Peugeot 405

1 Answer

I have a peogout 406 coupe v6 and cant open or lock with key fob have put new batterys in is there a way i can reset alarm thankyou


yes there is you need to get in the carand shut the door.
then place the key in the ignition and switch ignition on.
press and hold button down for 3-5 seconds.
remove the key and try locking and un locking on the button

Dec 03, 2009 | 1987 Peugeot Liberte

2 Answers

Peugot 406 central locking key fob not working have replaced batteries, failed to work after got wet in rain


if you got the FOB really wet then the circuit board is ruined, you are going to have to replace it.

Nov 02, 2009 | 1991 Peugeot 405

1 Answer

A colleague checked all my fuses on my peugeot 206 - 02 reg. This involved taking them all out one by one and checking them - This was due to a headlight problem - The headlights have now been replaced and...


you can reset it your self bu putting the key in the ignition switching the ignition on and pressing and holding the unlock button for 3-5 seconds then switching ignition off removing the key and try the central locking

Oct 29, 2009 | 1991 Peugeot 405

3 Answers

Peugeot 406 hdi executive 2002 will not start


immobiliser problem main dealer me thinks

Aug 18, 2009 | Peugeot 406 Cars & Trucks

2 Answers

307 central locking fault


If you have replaced the battery and the ecu wasn't in sleep mode, then you'll lose the synchronisation between immobiliser and fob. go to peugeot dealer or call out a car locksmith who then can reprogram your fob with car ecu. I have read the method in internet but not sure what the steps were. you can google it may be you'll find it.

Jun 28, 2009 | 2005 Peugeot 405

3 Answers

I need to reset my peugeot 406 key fob


Had same trouble with my 406, fixing no problem, with new battery in fob, insert into ignition, turn key, BUT DO NOT START ENGINE, hold button for about 10 seconds release button and remove key from ignition, then try and see if doors lock on remote, if not try again, had to do this a couple of times, and it worked, sorry to say that now my key fob button has completely fell apart, through ware and tare

May 19, 2009 | 2005 Peugeot 405

2 Answers

Peugeot 406 central locking


you need to reprogram the fob

Sep 07, 2008 | 2006 Peugeot 604

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...