Question about Peugeot 306
I DO NOT HAVE MAIN BEAM ON MY HEADLIGHTS,THE BULBS ARE FINE (tested).THE LIGHT ARM IS FINE(tested).I ONLY HAVE SMALL LIGHTS AND FULL BEAM.I THINK THE HEADLIGHT RELAY SWITCH NEEDS CHANGING.....BUT I HAVE NO MANUALSO NO IDEA WHERE IT IS OR WHAT COLOUR IT IS.ALL FUSES ARE FINE..CAN ANYONE HELP,THANKS
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Low beam headlights don't work
I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.
Posted on Jan 02, 2009
im a mechanic who owns a1995 pathfinder, had the same problem.your trouble is in your daytime running light module. try giving it a tap, bet they will come back on
Posted on Feb 07, 2009
At first 1994 C280 high beams began to not connect regularly when stick pushed forward, then not at all. Drove high beams by pulling and holding stick back towards steering wheel until that stopped working, too. Shop said the turn signal switch was at fault-- had seen it many times before with W202; about $160 to replace. Haven't done it yet, but should be an easy fix?
Posted on Jun 24, 2009
had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.
Posted on Jul 15, 2009
Tips for a great answer:
Mar 28, 2013 | 1991 Nissan 300ZX
HEADLIGHTS NOT WORKING
can be faulty headlight switch or issue with its wiring. Or its faulty head
troubleshoot the issue i suggest you few help links with appropriate solution.
So you can follow the test and confirm what exact problem is there in your case
of headlights not working:-----
the link below: -----
• Car headlight bulbs don't last long?
How to Replace a Headlight
How to Replace a Headlight Bulb
How to Replace a Headlight Switch
How to Replace a Headlight Assembly
How to Replace a Park Light Assembly
Nov 28, 2012 | 1986 GMC K1500
[Information] For a 2002 Toyota Camry, the Daytime
Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to
the center of the vehicle front) at a reduced power.
[The troubleshooting process:] Review the Owner's Manual and ensure the test
configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."
2. Set the Test Conditions according to Step 1 above.
3. Check the headlight bulbs to ensure they are not
burned out. If one burns out, there is a fair chance that the other would have burned
out at the same time. Replace as necessary.
In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]
My problem was that the test configuration did not have
the engine running and parking brake off - Step 1. Problem solved with much
thought, repetitive tests on the vehicle and going back to the basics -- what
does the Owner's Manual say and where are the applicable fuses and relays
Dec 30, 2011 | 2002 Toyota Camry
Jul 30, 2011 | 2002 Chevrolet TrailBlazer
Dec 07, 2010 | 1997 Honda Civic
Aug 09, 2010 | 2004 GMC Envoy
Jun 05, 2017 | 2004 GMC Envoy
Jul 26, 2017 | 1992 Toyota Corolla
Feb 02, 2009 | 2003 GMC Envoy
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: