Question about 2001 Isuzu Rodeo

1 Answer

Transfer case jumps out of gear

3rd used transfer case when n 4wd above 30mph jumps right to nuetral from high am i getting bad t-cases? or do i have other problem I am overlooking,operation of light in dash is normal, not blinking, used truck i just bought,so i checked gear ratios front & rear,,they match,4 turns each on drive shaft for 1 turn of the tire,front & back. V-6 automatic,, stays engaged in 2-wd just fine,trans shifts normal no problems,no check engine light,but it does have an abs light that comes on intermitant, tried to check for code but scanner wont get into abs on this vehicle. Power drive button,& winter drive button functions seem to work normal.would like to find out if anyone has had same problem & how they fixed it.already on 3rd used t-case form reputable auto salvage dealer.

Posted by on

  • Erich Gutermuth
    Erich Gutermuth Oct 29, 2012

    Went back & checked electric front actuator & collar on left front axle.everything is fine & operates as it should,power & winter drive operate w/no issues,why does it jump out of 4wd hi range to nuetral at speeds above 30 mph?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 108 Answers

Sounds like a servo or sensor problem more than a transfer case. try removing all electrical plugs to t case run it through the gears then replace one by one to see if there is a problem there.

Posted on Nov 29, 2014

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: start truck up and a/t

I'm having the same problem. I have a 1992 Rodeo V-6 4x4. I replaced the alternator, battery, and even took out a killer stereo system in case of shorts (didn't have the patience to check). Except mine does start with a little boost. I'm thinking of replacing the battery for a bigger one, but not sure if that will take care of the problem. Help anyone?

Posted on Aug 17, 2008

  • 2 Answers

SOURCE: it's a holden rodeo turbo/diesel 2005.check 4wd light on

I did this a few days back and is all fixed. Can email a picture/diagram for anyone that needs it.

Posted on Apr 24, 2009

  • 1 Answer

SOURCE: 2000 trooper jerks from a start no trans codes appear on scanner

I also had the same problem with my 2000 trooper.... the problem is u are low on fluid..... the reason u are low because your tranmission is leaking ..... it doesn't take must

Posted on May 06, 2009

simontricket
  • 235 Answers

SOURCE: Slips out of gear when in 4WD

Check the oil level in the shift on the fly (sotf) part of the axle thats the left of the front one - it holds about 1 pint of gear oil and gets missed at service time .

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford ranger - Where is the 4x4 actuator located


On the transfer case
Transfer Case - Electronic Shift
The four-wheel drive electronic shift-on-the-fly feature electrically shifts the vehicle transfer case between 2WD, 4WD HIGH, and 4WD LOW. The system mode is selected by the operator through the mode select switch (MSS) on the instrument panel. The operator is informed which mode the system is in by two instrument cluster indicators: one for 4WD HIGH which appears as 4WD, and one for 4WD LOW, which appears as 4WD LOW. Shifts into 4WD HIGH can be made at any speed. When shifting into 4WD HIGH with the vehicle stationary, tooth blockage may occur preventing shift completion. When the vehicle is driven above 8 km/h (5 mph) the shift will complete. When shifting in or out of 4WD LOW, the four-wheel drive (4WD) control module requires that the vehicle speed be less than 5 km/h (3 mph), the brake pedal be applied, and the transmission be in NEUTRAL (automatic transmission) or the clutch pedal be depressed (manual transmission).
The gearmotor encoder assembly is mounted externally on the transfer case. It drives a rotary cam which moves the mode fork and range fork within the transfer case between the 4WD HIGH, 4WD LOW, and 2WD range positions.
The four-wheel drive (4WD) control module controls the gearmotor encoder assembly that shifts between 4WD HIGH, 4WD LOW, and 2WD modes.

Mar 17, 2017 | Ford Cars & Trucks

1 Answer

Error message repair 4wd


I guess you probably don't know what transfer case you have ?
SERVICE 4WD
Refer to
?€¢
Transfer Case Description and Operation in Transfer Case - NVG 149-NP3


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 246-NP8


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 261-NP2


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 263-NP1


The NVG 246 EAU provides 5 modes, Auto 4WD, 4HI, 4LO, 2HI and Neutral.
The four manual mode, or range gear positions, of the NVG 261 transfer case are:
?€¢
2HI - 2 wheel drive high range


?€¢
4HI - 4 wheel drive high range, part-time


?€¢
4LO - 4 wheel drive low range, 2.72:1 gear ratio reduction


?€¢
N - Neutral, 4 wheel


The NVG 263 transfer case provides the driver with 4 manual mode/gear positions:
?€¢
2HI - 2 Wheel Drive high range


?€¢
4HI - 4 Wheel Drive high range


?€¢
4LO - 4 Wheel Drive low range


?€¢
Neutral


With the info I've given you ,you should be able too now !
There is probably a code stored somewhere !
DTC B0790 DTC B2725 DTC C0300 DTC C0305 DTC C0306 DTC C0321 DTC C0327 DTC C0359 DTC C0374 DTC C0379 DTC C0550.

Jan 31, 2015 | 2004 Chevrolet Silverado 2500

2 Answers

Where can i purchase a rebuilt transfer case for a 2007 Suzuki Grand Vitara >> Base 2.7L, RHD, V6. in Florida?


the chain is situated at the rear of the box and connects the output shaft of the gear box to the input shaft of the transfer case . it does wear and get loose and the gear teeth wear as well. all that is required is a chain and 2 gears and labour to replace
i feel that replacing the transfer case will not achieve much so i suggest that you talk with a service dealer to get a better idea of what is involved.

Jan 22, 2015 | 2007 Suzuki Grand Vitara 4WD

3 Answers

Why doesn't my 4x4 work


Do you have mechanical-shift four wheel drive,or electronic-shift, 4WD system ? Any lights lit on the dash ?
The electronic-shift, 4WD system consists of the following components:
  • Transfer case (For transfer case repair procedures, refer to Section 308-07B ).
  • 4WD control module (For 4WD control module installation, refer to 4WD control module in this section.)
  • Mode select switch (MSS)
  • Gearmotor encoder assembly
  • Automatic locking hubs (hub locks)
  • Pulse vacuum hub lock (PVH) solenoid and vacuum lines
  • The mechanical-shift four wheel drive (4WD) system consists of the following components:
  • Transfer case (For transfer case repair procedures, refer to Section 308-07B ).
  • Transfer case shift lever
  • Manual locking hubs
  • 4x4 indicators
  • Shift linkage (hub locks)

Dec 12, 2014 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

1996 ford explorer 4wheel drive will not engage into the hubs need to know how it works


make sure your 4WD switch is working.and fuse is okay.because your 4WD is control by 4 electric shift motors in which drive a rotary cam which moves the mode fork and range fork inside the transfer case to select between 2WD HIGH A4WD - 4WD HIGH AND 4WD LOW RANGE.a shift motor sensing plate on the shift motor monitors the range in which the transfer case is operating a transmission range sensor monitors the gear position of the transmission.which must be in neutral to shift into low.a pair of solenoids one for 2WD one for 4WD.mounted on the upper right firewall route vacuum to the vacuum motor which engages and disengages the center axle disconnect collar in the front axle assembly.a 4 x 4 shift motor relay module contains two GEM controlled relays which shift the transfer case shift motor between 2WD and 4WD modes.a solid state clutch relay activates the A4WDclutch inside the transfer case.

Dec 13, 2009 | 1996 Ford Explorer

1 Answer

Different 4wd settings


you should have 2 hi 4 low 4 hi and nuetral on your transfer case 4 hi would be anything up to 35-40mph or lower 4 low is almost never used it just gears down your t case if your climbing a hill or super stuck the manual locing hubs are extremely reliable do not have them locked on dry pavement or concrete just loose dirt snow ice ect put the tranny gear shifter in nuetral to put your t case in 4 low

Oct 05, 2009 | 1989 Toyota Pickup SR5

1 Answer

01 dodge 1500 4x4 Transfer case / transmission problem


check the rear differential as well as the transfer case...you may have broken something in both of them...i have seen it happen...since 4low uses a different gear it is possible for it to move in low and not 4 high

Oct 24, 2008 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...