Question about Cars & Trucks

Open Question

How to install a Dorman 74300 Rear Driver Side Replacement Interior Cargo Door Handle

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mmptruck
  • 124 Answers

SOURCE: how do i replace interior

You have to remove the door trim, and you will see 2 screws holding yhe handle to door. Remove handle, remove clip from rod and refit new handle in reverse order.

Posted on Jul 29, 2008

Ad
  • 508 Answers

SOURCE: How to replace '96 Ford Explorer driver side exterior door handle

You will need to remove the door panel to gain access to the handle. Roll the window up or down as needed to get to the nuts that attach the handle to the door. You will also need to remove a rod the goes to the door lock. You will see the rod after the door panel is removed. Good luck.

Posted on Feb 18, 2009

  • 1986 Answers

SOURCE: Installing replacement side mirror on 2007 Subaru Forester

yes... you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can access the bolts holding the mirror on and disconnect the wiring harness as well..

Posted on Aug 20, 2009

  • 1986 Answers

SOURCE: need to remove inner rear passenger side door

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle

Posted on Nov 05, 2009

  • 1 Answer

SOURCE: Interior Door Handle

This was a three minute repair, once I had the replacement handle. Leave the door panel alone! Remove the single screw holding the old handle in place. Use a flat blade screwdriver to jimmy the old handle away from the door about an inch. There are two plastic clips holding it to the rods, one for the locking mechanism and one for the latch. Use the flat blade screwdriver to unclip these two connectors. Remove the broken latch, and don't worry, the rods won't disappear into the door! Reverse these steps with the new handle (insert rods, attach clips, wiggle assembly into place, and fasten with single screw). You're done!

Posted on Dec 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace inside door handle passenger side on a 2011 GMC Terrain?


Search Results

    How To Install Replace Inside Door Handle Chevy Equinox ...

    ? 9:02
    https://www.youtube.com/watch?v=cY6asyM2R6g
    Feb 2, 2012 - Uploaded by 1A Auto Parts
    How To Install Replace Inside Door Handle Chevy Equinox 05-09 1AAuto.com .... found your tutorial on fixing my driver's side door handle for my 2006 Equinox. .... Door Handles Chevy Equinox 2010 2011 2012 GMC Terrain ...

    How To Install Replace Inside Door Handle 2007-13 ...

    ? 9:05
    https://www.youtube.com/watch?v=QonKLwhk2CE
    Apr 2, 2015 - Uploaded by 1A Auto Parts
    http://www.1aauto.com/interior-door-handle-driver-side-front/i/1adhi00417 1A Auto shows you how to repair, install, fix,change or replace a broken or snappe... ... 10, 11, 12, 13 Chevy Silverado, Tahoe, Suburban and GMC Sierra, Yukon Denali ...2007-2011 Tahoe Yukon Suburban Escalade Vent Section ...Missing: terrain

    How To Install Remove Rear Outside Door Handle 2007-13 ...

    ? 10:02
    https://www.youtube.com/watch?v=7ZUTqqEzpZg



Feb 08, 2016 | GMC Cars & Trucks

Tip

Door handle repair for Ford fusion


The door handle will not allow unlocking from the inside. This is a common problem with the Ford Fusion 2007 to 2012 and other cars. A cheap piece of plastic breaks that connects the lock lever with the door handle. You can roll down the window and unlock from the outside or hold both levers together and pull open from the inside. This is a very simple repair. Go to any of many web sites for auto parts and buy a replacement. I bought a Dorman 81702 Ford/Lincoln/Mercury Interior Front Driver Side Replacement Door Handle. I popped off the lid that covers a hidden screw inside the recess of the door handle. You have to use a torque bit to unscrew the screw. I then unscrewed the torque screw holding the upper part of the door panel that is opposite the door hinge. The upper part of the door panel can be be carefully pulled away with moderate pressure allowing access to the door handle mechanism. One more bolt holds the door handle part in place. Pull out the broken door handle part, remove the locking cable and put in the new part. Reverse the process to finish up. The whole process took about 10 minutes.

on Sep 18, 2015 | 2010 Ford Fusion Hybrid

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

Fixing the driver's side door handle for a 1989 Lincoln Town Car. I need the diagrams.


I just fixed mine. The small clip that attaches the door handle lever to the release lever for the latch is made of plastic and breaks. Dorman makes a good replacement very inexpensively, and it's available at almost ALL auto parts stores. Best thing to do is to look at the PASSENGER SIDE door, and that will tell you how the DRIVER SIDE door release assembles... but I'll bet money that you'll be buying the clip :)

May 24, 2014 | Cars & Trucks

1 Answer

I have owned a 1994 and a now a 2001 chevy blazer and on both suv's the drivers door spring and i think its called a hinge pin on the interior part of the door where the latch connects to the door...


Yes it is very common, the driver side door is the one most used and the factory parts cannot handle it. I have had many break on me if not seperate completely from the door. The best thing to do is go to your local parts store and get a Dorman replacement for them.
Good Luck!

May 11, 2011 | 2001 Chevrolet Blazer

2 Answers

Replace inside door handle drivers side


Here is a replacement part: http://www.amazon.com/Dorman-79548-Tribute-Interior-Replacement/dp/B0031GJYZW
To install the new one, remove the plastic door panel by removing the philips screws and clips that hold it in place. You should be able to pull it straight up and out. Don't put too much force on the panel, the plastic is cheap. The interior door handle should now be able to be unscrewed and replaced.

Mar 07, 2011 | 2001 Mazda Tribute

1 Answer

Installing replacement side mirror on 2007 Subaru Forester


yes... you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can access the bolts holding the mirror on and disconnect the wiring harness as well..

Aug 20, 2009 | 2007 Subaru Forester 2.5X L.L. Bean...

3 Answers

1997 buick park ave 4 door right front door handle won,t work from the outside


Order the exterior door handle AND the clip that attaches the rod to the exterior handle from your local dealership ( any part in the salvage yard will have at least as much wear as the one U are replacing ) Also order a can of touch up paint matching your car. After you have the parts and have painted the new exterior handle, roll down the window and remove the interior door panel. ( instructions have been posted at 'replace door lock buttom' ) Two nuts, one on each side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will need to reattach the rod to new handle ) To install new mechanism put the new clip on the rod, carefully place the gasket and the new handle in place and install nuts to secure. Test the door handle and make sure it works. Reinstall interior door panel.

Jul 06, 2009 | 1997 Buick Park Avenue

1 Answer

Exterior light


i replaced a switch that is just inside of the driver side door.. yes in the door. the cargo light and the interior light are on the same switch.. after about 45 min the cab/cargo light should be shutting off tho..thre is also another switch in the passenger side door.. the only place to get the switch is at the dealer and it is about 45 bucks...

Oct 19, 2008 | 1996 Ford F150 Regular Cab

2 Answers

Driver side interior door handle


Replace it with the rear doors handle till you can buy one for the rear door. thats what i did.

Oct 03, 2008 | 2001 Chevrolet Prizm

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...