Question about 2005 Chevrolet Colorado

Open Question

I have a 2005 Chevy Colorado and my brake lights do not work! I have checked the bulbs and the fuse and they are all good.

Brakes work fine just no lights on all three blubs.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: I have a 2005 Chevy Colorado and my brake lights

it is the brake switch on the pedal. the contact inside the switch is bad

Posted on Mar 29, 2009

Ad
  • 95 Answers

SOURCE: 2005 Chevy Colorado 2wd Brake Light Problems plz help!!

check the ground from the rear lights...

Posted on May 19, 2009

  • 462 Answers

SOURCE: 2005 chev trailblazer v6 4.2 rear side brake light

CHECK FOR POWER AND GROUND AT THE CIRCUIT BOARD FOR THE AFFECTED BRAKE LIGHT. IF THAT CHECK OUT GOOD THEN CHECK THE BULB CONNECTION FOR BURNED CONNECTORS, THIS IS A COMMON PROBLEM. LOOPING A TEST LIGHT FROM THE POWER TO THE GROUND CONNECTION AND HOLDING THE BRAKE PEDAL DOWN IT SHOULD LIGHT. IF IT DON'T THE CIRCUIT BOARD IS BAD.

Posted on May 24, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 68 Answers

SOURCE: 2005 Chevy Colorado drivers side window, and power locks

Check for door ajar switches not making contact.

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2009 Chevrolet Colorado and my rear brake lights are not working. My brakes work but not my rear lights. Tried replacing bulb but that wasn't problem. Hopefully someone has some answers.


if all the brake light bulbs are ok it could be the brake light switch which is normally on the brake pedal hope this helps.also check if theres a fuse for your brake lights some vehicles do.

Oct 07, 2016 | 2009 Chevrolet Chevrolet Colorado LT

1 Answer

2003 Chevy Silverado When I apply the brakes the


I had an issue like this one on a 2007 Colorado. I assume you mean the turn signal indicator inside the truck lights up. It was a bad bulb. think it was the turn signal bulb on the side that is lighting up. As for the gear indication being dim there is more than one bulb that lights them up and one may have blown. I hope this helps.

Jul 15, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

We had a cold and snow spell that recently passed through here in North Texas. Since then when I push on the brake of my '05 Chevy Colorado the right blinker arrow lights up and I hear a click under the...


Look for a grounding issue. Sounds like power is feeding back through the TS circuit.

If you have no testers, another way is to pull one bulb at a time, and test again.

Also, you should find that some bulb somewhere is not working correctly, under the brake light sceneario.

Feb 19, 2010 | 2005 Chevrolet Colorado

2 Answers

I have a 2005 Chevy Colorado. The right rear passenger tail light will not come on, I have changed bulbs, and I have changed the entire lense assembly.Everytime you put your foot on the brake the right...


I have this exact same issue with my 05 Colorado and its so annyoying (not to mention unsafe)... I thought it was just the blub- becuase in my case my signal is no loger blinking. My break light still works, as does my parking light...

Any thoughts as to why this is happening?

Please HELP!!!

Dec 08, 2009 | 2005 Chevrolet Colorado

2 Answers

Brake Lights are not working on 2007 Chevy Colorado


Both my rear brake lights went out at the same time. o7 chevy colorado. What are my options?

May 28, 2009 | 2005 Chevrolet Colorado

1 Answer

2005 Toyota Sienna rear brake light problem. The rear center brake light works. The rear left and right brake lights do not. Fuses are fine. Checked bulbs and they look fine and have continuity. If not...


have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
otherwise-
Check continuity of live from center to lh & rh lights and/or is there a live at those lights

May 03, 2009 | 2004 Toyota Sienna

2 Answers

I just bought a 07 chevy colorado a few months ago and now none of my brake lights work. what could it be?


after u check all the bulb try to check the fuses if its ok change the brake light switch which is located front of the brake pedal

Apr 07, 2009 | 2007 Chevrolet Colorado (Extended Cab) New...

Not finding what you are looking for?
2005 Chevrolet Colorado Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...